where to put 2nd set of flush mount rod holders on Trident 15? - Kayak Fishing Adventures on Big Water’s Edge

garety · 04-27-2010, 11:59 PM

Any one have any pictures of where to put a second set of flush mount rod holders on a Trident 15?

I ve been looking on line and not seen any pictures, though the T=15s sold by OEX advertise 4 flush mounts so i know it can be done.

I was thinking behind the set on top, but after cutting the holes, i realized that spot would not work as it interferes with existing set, as well as the seat.

bellcon · 04-28-2010, 07:03 AM

Garety
I did it like this:

You will need to remove and reposition the factory seat pad eye.

The front of my Trident looks like this:

I use the rear flush mounts the most.

garety · 04-28-2010, 08:05 AM

Thank you very much Bellcon, That is one of 3 locations i hade identified as a possible mount location. I just did not want to patch 2 more holes before finding the right location.

GregAndrew · 04-28-2010, 08:51 PM

If I had it to do over again, I would not put a second set of flushmounts on my Trident. If you have rod holders on your bait tank and/or box/crate, then there are more than you need behind you.

Don, show him the mount you have on your Rod Pod. That has got to be more useful than any flushmounts.

04-27-2010, 11:59 PM	#1
garety Junior Join Date: Apr 2010 Posts: 2	where to put 2nd set of flush mount rod holders on Trident 15? Any one have any pictures of where to put a second set of flush mount rod holders on a Trident 15? I ve been looking on line and not seen any pictures, though the T=15s sold by OEX advertise 4 flush mounts so i know it can be done. I was thinking behind the set on top, but after cutting the holes, i realized that spot would not work as it interferes with existing set, as well as the seat.

04-28-2010, 07:03 AM	#2
bellcon Senior Member Join Date: Jul 2007 Location: San Pedro Posts: 999	Garety I did it like this: You will need to remove and reposition the factory seat pad eye. The front of my Trident looks like this: I use the rear flush mounts the most. __________________

04-28-2010, 08:05 AM	#3
garety Junior Join Date: Apr 2010 Posts: 2	Thank you very much Bellcon, That is one of 3 locations i hade identified as a possible mount location. I just did not want to patch 2 more holes before finding the right location.

04-28-2010, 08:51 PM	#4
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	If I had it to do over again, I would not put a second set of flushmounts on my Trident. If you have rod holders on your bait tank and/or box/crate, then there are more than you need behind you. Don, show him the mount you have on your Rod Pod. That has got to be more useful than any flushmounts.