where to put 2nd set of flush mount rod holders on Trident 15?
 

Any one have any pictures of where to put a second set of flush mount rod holders on a Trident 15?

I ve been looking on line and not seen any pictures, though the T=15s sold by OEX advertise 4 flush mounts so i know it can be done.

I was thinking behind the set on top, but after cutting the holes, i realized that spot would not work as it interferes with existing set, as well as the seat.

Garety
I did it like this:
http://i239.photobucket.com/albums/f...ushmounts1.jpg
You will need to remove and reposition the factory seat pad eye.

The front of my Trident looks like this:
http://i239.photobucket.com/albums/f...iewfromtop.jpg
http://i239.photobucket.com/albums/f...cottymount.jpg

I use the rear flush mounts the most.

Thank you very much Bellcon, That is one of 3 locations i hade identified as a possible mount location. I just did not want to patch 2 more holes before finding the right location.

If I had it to do over again, I would not put a second set of flushmounts on my Trident. If you have rod holders on your bait tank and/or box/crate, then there are more than you need behind you.

Don, show him the mount you have on your Rod Pod. That has got to be more useful than any flushmounts.