Foam Blocks - Kayak Fishing Adventures on Big Water’s Edge

zinkysd · 02-14-2010, 02:23 PM

If it's for a Eagle/Cuda or Lowrance fishfinder go to Dana Point Jet Ski & Kayak Center or FastLane Kayak in SD. They have them Pre cut to fit these tranducers and they're only about $3.00. Just goop the foam down and add a little water then insert transducer. it works much better than gooping the transducer in.

Ken
Team Dana Point Jet Ski

bronzbck1 · 02-15-2010, 03:25 AM

Quote:

Originally Posted by zinkysd

If it's for a Eagle/Cuda or Lowrance fishfinder go to Dana Point Jet Ski & Kayak Center or FastLane Kayak in SD. They have them Pre cut to fit these tranducers and they're only about $3.00. Just goop the foam down and add a little water then insert transducer. it works much better than gooping the transducer in.

Ken
Team Dana Point Jet Ski

I guess you did not notice I'm from the right coast!

zinkysd · 02-16-2010, 07:18 AM

Quote:

Originally Posted by bronzbck1

I guess you did not notice I'm from the right coast!

Go to your local Hobie dealer and they should have the foam block also.

Ken
Team Dana Point Jet Ski

02-14-2010, 02:23 PM	#1
zinkysd Hobie Fishing Team Join Date: Apr 2007 Posts: 145	If it's for a Eagle/Cuda or Lowrance fishfinder go to Dana Point Jet Ski & Kayak Center or FastLane Kayak in SD. They have them Pre cut to fit these tranducers and they're only about $3.00. Just goop the foam down and add a little water then insert transducer. it works much better than gooping the transducer in. Ken Team Dana Point Jet Ski __________________