Kayak Fishing Adventures on Big Water’s Edge

Kayak Fishing Adventures on Big Water’s Edge (http://www.bigwatersedge.com/bwevb/index.php)
-   General Kayak Fishing Discussion (http://www.bigwatersedge.com/bwevb/forumdisplay.php?f=11)
-   -   Foam Blocks (http://www.bigwatersedge.com/bwevb/showthread.php?t=6748)

bronzbck1 02-13-2010 02:21 PM
Foam Blocks
 
Where can I find foam for my transducer install? I know you guys have been through this! Thanks:reel:

dtownfan 02-13-2010 05:06 PM
what kind of transducer? i am gonna use the hummingbird kit. i have seen them made out of "pool noodles" though.

Hunters Pa 02-13-2010 07:25 PM
What kind of foam? You can get the thick garage floor padding stuff at Big Lots

zinkysd 02-14-2010 02:23 PM
If it's for a Eagle/Cuda or Lowrance fishfinder go to Dana Point Jet Ski & Kayak Center or FastLane Kayak in SD. They have them Pre cut to fit these tranducers and they're only about $3.00. Just goop the foam down and add a little water then insert transducer. it works much better than gooping the transducer in.

Ken
Team Dana Point Jet Ski

bronzbck1 02-15-2010 03:25 AM
Quote:
Originally Posted by zinkysd (Post 51608)
If it's for a Eagle/Cuda or Lowrance fishfinder go to Dana Point Jet Ski & Kayak Center or FastLane Kayak in SD. They have them Pre cut to fit these tranducers and they're only about $3.00. Just goop the foam down and add a little water then insert transducer. it works much better than gooping the transducer in.

Ken
Team Dana Point Jet Ski

I guess you did not notice I'm from the right coast!

zinkysd 02-16-2010 07:18 AM
Quote:
Originally Posted by bronzbck1 (Post 51637)
I guess you did not notice I'm from the right coast!
Go to your local Hobie dealer and they should have the foam block also.

Ken
Team Dana Point Jet Ski


All times are GMT -8. The time now is 06:00 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.