10-16-2017, 07:58 PM | #1 |
Junior
Join Date: Jul 2013
Posts: 16
|
Crack on kayak
Attachment 22542 Last edited by FAT TONY; 10-16-2017 at 08:42 PM. Reason: Adding picture |
10-16-2017, 08:02 PM | #2 |
Senior Member
Join Date: Nov 2014
Location: SGV
Posts: 848
|
Got any pics? It depends on where that crack is.
__________________
Baitfish catcher extraordinaire |
10-16-2017, 08:16 PM | #3 |
Junior
Join Date: Jul 2013
Posts: 16
|
Let me figure out how to put up a picture
|
10-16-2017, 10:54 PM | #4 |
Senior Member
Join Date: Sep 2015
Location: The I. E.
Posts: 353
|
If that is the extent of the damage, it’s fixable. I would have questions about the plastic itself. Is it degraded and brittle? To be sure of things, I’d take it to OEX and have them look at it.
|
10-17-2017, 09:52 AM | #5 |
Senior Member
Join Date: Aug 2015
Location: Agoura Hills
Posts: 166
|
This may be kind of crazy, but has anyone tried Flex Seal?
They have a tape product that looks like it would stick to anything: https://www.flexsealproducts.com/pro...4aApIoEALw_wcB Andy |
10-17-2017, 10:45 AM | #6 | |
Senior Member
Join Date: Sep 2015
Location: The I. E.
Posts: 353
|
Quote:
|
|
10-17-2017, 11:26 AM | #7 |
Senior Member
Join Date: Jul 2006
Location: Fullerton
Posts: 1,360
|
That's why I chime in when I see someone adding hatches or such to keep the scrap in case you need to do a plastic weld. Nothing better, I would think, than repairing with exactly the same material.
|
10-17-2017, 01:33 PM | #8 |
Senior Member
Join Date: Aug 2012
Posts: 332
|
http://www.marinetex.com/products/ma...e-tex-flexset/
Specifically states that it can be used above and BELOW the waterline. I would spread it above the crack in the hull and below where there is water contact. The fact that it's flexible is key as well, you don't want a hard epoxy to crack. Oh, and it states that it will bond to Polyethylene which is key. Then test water worthiness of craft. |
10-17-2017, 05:07 PM | #9 |
Señor member
Join Date: Mar 2005
Location: San Diego, CA
Posts: 1,627
|
HD sells this, which is similar if not the same as marine tex. I used to buy marine tex, but it is $28 at west marine, and Loctite is $6. I have used both on skiff repairs, seem identical to me. HD also sells a plastic version by loctite. I'd ask the pros at OEX first though, the crack is in a precarious spot.
http://www.homedepot.com/p/Loctite-0...5604/100371825 |
10-18-2017, 07:09 AM | #10 |
Senior Member
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
|
|
10-18-2017, 07:50 AM | #11 | |
Senior Member
Join Date: Jan 2012
Posts: 2,526
|
That ain’t no crack
Quote:
|
|
10-18-2017, 10:03 AM | #12 |
Junior
Join Date: Jul 2013
Posts: 16
|
...
|
10-18-2017, 10:12 AM | #13 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
It can be welded, but I do not take on the liability of cracks that size under the water line. Always a better bet if you can approach the repair from both inside and out. KC Welder, heat gun and scrap polyethylene. I have used some G Flex epoxy and just not as reliable.
__________________
|
10-22-2017, 09:48 PM | #14 |
Junior
Join Date: Jul 2013
Posts: 16
|
I want to get it fixed. I am planning to sell it after it's fixed. But if their is someone that can fix it and would like to buy it. Let me know.
|
10-22-2017, 10:05 PM | #15 |
Member
|
Kayak crack repair
Loctite does work,however because of a bottom hull slit or crack you need to apply a cloth patch over that slit.Your hull oscillates or rocks as it goes thru the surf and sea surface.Oex probably has good advice on such repairs.I had a crack on a pylon next to a water drain hule.I applied clear whtie Gorilla glue then used a netted cloth with another layer of glue.So far no leaks.Good luck
|
10-23-2017, 05:37 AM | #16 |
Sea Hunter
|
I'll fix it for you where you at
I'm in San Diego weld some metal mesh into plastic inside and cover with welded plastic, on both sides.
Be careful you don't get to hot and make it worse. Go slow a little at a time so it can cool. If you get to big of an area hot...it will fall out...
__________________
Duke Mitchell Last edited by MITCHELL; 10-25-2017 at 05:39 AM. |
10-23-2017, 04:18 PM | #17 |
Junior
Join Date: Jul 2013
Posts: 16
|
Thanks for the offer. But I'm Baldwin Park.
|
10-24-2017, 11:33 PM | #18 |
Senior Member
Join Date: Jan 2014
Location: Long beach
Posts: 303
|
Isn't crack illegal? Why is crack on your kayak?
|
10-25-2017, 10:00 AM | #19 |
Senior Member
Join Date: Aug 2015
Location: Yucaipa, CA
Posts: 1,136
|
I would drill a hole at each end of the crack to help stop it from spreading. Then do your repair.
__________________
you can't eat it if you release it |
|
|