modifying a hobie live well for an OK Trident - Kayak Fishing Adventures on Big Water’s Edge

YakDout · 07-08-2014, 05:54 AM

The thing about the cut out is it might be slightly smaller than need for the plugged hole. Saw blade will take 1/8"

Sent from my iPhone using Tapatalk

oneyedeer · 07-08-2014, 10:39 AM

I think hobie carries a kit for other kayak use check with oex

Raskal311 · 07-08-2014, 11:56 AM

Aquarium bulkhead and cap will work. Would be easy to remove if needed.

GregAndrew · 07-08-2014, 02:24 PM

A friend of mine used a spacer block (under the tank)and some elbows to make it work with his older model Outback.

Iceman · 07-09-2014, 06:27 AM

http://www.bigwatersedge.com/bwevb/s...ad.php?t=18639

07-08-2014, 11:56 AM	#3
Raskal311 Senior Member Join Date: Mar 2011 Location: Santa Ana/Westminster Posts: 1,256	Aquarium bulkhead and cap will work. Would be easy to remove if needed. __________________ Kevin Yellow PA12

07-09-2014, 06:27 AM	#5
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	http://www.bigwatersedge.com/bwevb/s...ad.php?t=18639 __________________

07-08-2014, 05:54 AM	#1
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	The thing about the cut out is it might be slightly smaller than need for the plugged hole. Saw blade will take 1/8" Sent from my iPhone using Tapatalk

07-08-2014, 10:39 AM	#2
oneyedeer Senior Member Join Date: May 2011 Location: Orange County, ca Posts: 684	I think hobie carries a kit for other kayak use check with oex

07-08-2014, 02:24 PM	#4
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	A friend of mine used a spacer block (under the tank)and some elbows to make it work with his older model Outback.