how to fill new reels

[dgax65]

Originally Posted by mars

So Adi, do you use mono backing to swivel to braid to swivel to leader line?

I would join the spectra to mono backing with an Albright or Uni-to-Uni. You probably aren't going to get spooled down that deep fighting anything from a kayak. Tie it once and you won't see that knot again until it's time to clean the Spectra.
An Albright or Uni-to-Uni is a good choice for joining the Spectra to a mono top-shot. For this application, where the knot will pass through the guides more often, a small diameter knot with short tags is important. I prefer using the Albright because of the smaller diameter. You can also put a dab of glue on the tag ends to enable them to pass through the guides more easily.
Using a swivel or a ring is a viable option when joining Spectra to a fluorocarbon or heavy mono leader. I often use an Owner #4 solid SS ring or a 130# Spro swivel between the Spectra and the leader. It's easier to use a swivel than trying to tie an Albright when on the water. The swivel/ring method also allows you to quickly change out pre-made leaders and rigs.

[wavster]

Doug, out of curiousity, what type of glue would you use on the knot. I've
heard of using glue, but have never done it.

I'm using an albright with the Spectra to Fluoro or mono and haven't had one fail.
But the glue might be better for going through the guides...