Little Tip I Thought I'd Pass On. - Kayak Fishing Adventures on Big Water’s Edge

kareem korn · 05-24-2010, 02:11 PM

If you drill, cut-out, punch holes in you kayak. Save the shavings no matter how small. Keep them in a little baggy or something. If you abandon that application and are left with screw holes you can melt down the shavings you saved and fill in the holes with a near perfect match.

I just found that out yesterday.

Carry on.

Jimmyz123 · 05-24-2010, 02:35 PM

Thanks for the heads up.

Gino · 05-24-2010, 02:44 PM

I've done the same thing. a Great tip.

fongman · 05-24-2010, 11:22 PM

The kayak shops usually save cutouts from their installations. If you need to make a repair and you don't have any scraps, go visit a shop that carries your make and ask them if you can have a piece that matches your kayak. If they have it, they're usually more than happy to give some to you.

miguelitro · 05-25-2010, 11:10 AM

I had to install an erroneous rod holder just to get a piece to fix a hole with

I have some extra cobra yellow plastic in pacific beach if anyone needs it!

baitcasterboy20 · 05-25-2010, 04:26 PM

that is cool that you know that

05-24-2010, 02:11 PM	#1
kareem korn Senior Member Join Date: May 2006 Location: C-bad Posts: 431	Little Tip I Thought I'd Pass On. If you drill, cut-out, punch holes in you kayak. Save the shavings no matter how small. Keep them in a little baggy or something. If you abandon that application and are left with screw holes you can melt down the shavings you saved and fill in the holes with a near perfect match. I just found that out yesterday. Carry on.

05-24-2010, 02:35 PM	#2
Jimmyz123 Senior Member Join Date: Mar 2010 Location: San Diego Posts: 2,385	Thanks for the heads up.

05-24-2010, 02:44 PM	#3
Gino Senior Member Join Date: Mar 2009 Posts: 520	I've done the same thing. a Great tip.

05-24-2010, 11:22 PM	#4
fongman Senior Member Join Date: Mar 2005 Posts: 116	The kayak shops usually save cutouts from their installations. If you need to make a repair and you don't have any scraps, go visit a shop that carries your make and ask them if you can have a piece that matches your kayak. If they have it, they're usually more than happy to give some to you.

05-25-2010, 11:10 AM	#5
miguelitro Team Bad Habits Join Date: Jun 2009 Location: Pacific Beach Posts: 119	I had to install an erroneous rod holder just to get a piece to fix a hole with I have some extra cobra yellow plastic in pacific beach if anyone needs it!

05-25-2010, 04:26 PM	#6
baitcasterboy20 Member Join Date: Mar 2010 Location: south florida Posts: 69	that is cool that you know that