07-11-2019, 10:37 AM | #1 |
Senior Member
Join Date: May 2017
Location: RSM, Ca.
Posts: 113
|
live well pump
Any advice? |
07-11-2019, 10:51 AM | #2 |
Senior Member
Join Date: Aug 2012
Posts: 1,823
|
does it run at all when you turn it on?
__________________
"Beware the lollipop of mediocrity; lick it once and you’ll suck forever." — Brian Wilson |
07-11-2019, 12:03 PM | #3 |
Large Member
Join Date: Jul 2012
Location: La Verne, CA
Posts: 1,011
|
Is it rotating the right direction? Perhaps the polarity of the battery is backwards
|
07-11-2019, 01:11 PM | #4 |
Senior Member
Join Date: May 2017
Location: RSM, Ca.
Posts: 113
|
|
07-11-2019, 01:38 PM | #5 |
Senior Member
Join Date: Jun 2014
Location: East County San Diego
Posts: 657
|
A multimeter is a great tool to have and you can grab one for cheap at harbor freight, especially with their coupon.
With the multimeter you can check the motor and battery to see if they are good. Is it a hobie? If so, check the switch. Do you have an inline fuse? If so, check the fuse. There are only a few things that can fail, so just go through each item and then check signal flow and you'll find it. Lots of resources online to help you with how to use a multimeter correctly. |
07-11-2019, 02:49 PM | #6 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
what kind of pump and what kind of tank. Switch could be bad.
__________________
|
07-11-2019, 03:03 PM | #7 |
Senior Member
Join Date: May 2017
Location: RSM, Ca.
Posts: 113
|
|
07-11-2019, 03:05 PM | #8 |
Senior Member
Join Date: May 2017
Location: RSM, Ca.
Posts: 113
|
[QUOTE=jruiz;301939]Is it rotating the right direction? Perhaps the polarity of the battery is backwards[/QU
its not running at all |
07-11-2019, 05:39 PM | #9 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
Hobie livewell switches are prone to failure over time. I'd disconnect battery and cut out the switch and see if it works then, Switches run $15
__________________
|
07-11-2019, 10:56 PM | #10 |
Senior Member
Join Date: Sep 2010
Location: South OC
Posts: 1,606
|
|
07-11-2019, 11:22 PM | #11 |
Senior Member
Join Date: Aug 2012
Posts: 1,823
|
Put the switch in a bowl of rice
__________________
"Beware the lollipop of mediocrity; lick it once and you’ll suck forever." — Brian Wilson |
07-14-2019, 08:41 AM | #12 |
Senior Member
Join Date: Sep 2011
Location: San Diego
Posts: 901
|
I direct connect, no switch for me.
Ebay is your friend ..... |
07-15-2019, 09:31 AM | #13 |
Senior Member
Join Date: Jun 2014
Location: East County San Diego
Posts: 657
|
Same.
My old DIY bait tank had a very nice waterproof toggle switch housed in the pelican case and this never failed, but on my hobie after three bad switches, I just bypassed the switch and went straight to the battery. Problem solved. |
07-16-2019, 03:00 PM | #14 |
Senior Member
Join Date: May 2016
Location: SANTUCKET
Posts: 629
|
DIDO
There's only one good place for that switch, the trash!
|
07-17-2019, 06:29 AM | #15 |
Senior Member
Join Date: Jun 2014
Posts: 420
|
Agree on cutting out the switch. Use a shrink tube connector or a wire nut filled with dielectric grease. If you really like having a switch, you could get a livewell v2 switch and mount it on the side of your tank in the highest flattest section you can find. The V2 switch is far superior.
|
07-17-2019, 09:23 AM | #16 |
Senior Member
Join Date: Aug 2012
Location: Vista, CA
Posts: 122
|
I have been using this waterproof switch with no issues so far.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 |
|
|