Kraken----- - Kayak Fishing Adventures on Big Water’s Edge

MITCHELL · 03-04-2019, 08:44 AM

Anybody no where I can gets some blue welding rod.

MITCHELL · 03-04-2019, 09:43 AM

No more

kirkdavis · 03-05-2019, 09:19 AM

Now you have red white and blue. Go USA!

MITCHELL · 03-05-2019, 01:23 PM

Buddy

Reiner · 03-05-2019, 08:58 PM

It's a fishing website. Keep your political BS to yourself and off the forum.

MITCHELL · 03-06-2019, 05:11 AM

Its called freedom....don't like what you see move along

Hunters Pa · 03-06-2019, 05:42 AM

I like the metal mesh reinforcement. What is the beige paste, glue? I have welded my share of cracks, but using a soldering iron and zip ties or trimmings from previous installs for material

MITCHELL · 03-06-2019, 06:00 AM

I don't no about any glue. But it works good, its was a cold day and I used a heat gun to. I have used harbor freight plastic welders and this works way better. It's best if you melt the mesh into kayak. There's no wasting of plastic rod. Holding plastic on the side does not work as well and takes for ever as apposed to pushing round rods down the center.

MITCHELL · 03-06-2019, 06:08 AM

Clear probably doesn't show as bad maybe ill see if they fit through the hole in my iron.
Before I got the hobie welder, I patched my canoe heating up a butter knife with a propane torch, and put mesh that got the job done to, it was like cauterization of a wound and flattened out some bumps.

Hunters Pa · 03-06-2019, 08:28 AM

Quote:

Originally Posted by MITCHELL

Clear probably doesn't show as bad maybe ill see if they fit through the hole in my iron.
Before I got the hobie welder, I patched my canoe heating up a butter knife with a propane torch, and put mesh that got the job done to, it was like cauterization of a wound and flattened out some bumps.

Save any trimmings from installs of hatches or whatever. can also trim thin strips from inside underneath the hatch.

MITCHELL · 03-06-2019, 08:39 AM

It's thick and melts slow I thought about cutting it into strips I found my tin snips after I finished the job.
By the way best duck tape ever made is 622 shurtape I personally used to use it to mask new windows on building's. Put it on one time and take it off after finish. No glue residue from tape

03-05-2019, 09:19 AM	#3
kirkdavis Senior Member Join Date: Apr 2015 Location: SD County Posts: 360	Patriotic Now you have red white and blue. Go USA!

03-06-2019, 05:11 AM	#6
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	Stay off my post.... Its called freedom....don't like what you see move along __________________ Duke Mitchell

03-06-2019, 06:00 AM	#8
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	It's a hobie plastic welder I got from Andy oex sunset beach I don't no about any glue. But it works good, its was a cold day and I used a heat gun to. I have used harbor freight plastic welders and this works way better. It's best if you melt the mesh into kayak. There's no wasting of plastic rod. Holding plastic on the side does not work as well and takes for ever as apposed to pushing round rods down the center. __________________ Duke Mitchell Last edited by MITCHELL; 03-06-2019 at 06:05 AM.

03-06-2019, 06:08 AM	#9
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	Zip ties is a good idea Clear probably doesn't show as bad maybe ill see if they fit through the hole in my iron. Before I got the hobie welder, I patched my canoe heating up a butter knife with a propane torch, and put mesh that got the job done to, it was like cauterization of a wound and flattened out some bumps. __________________ Duke Mitchell Last edited by MITCHELL; 03-06-2019 at 07:01 AM.

03-06-2019, 08:39 AM	#11
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,277	I have blue cut outs from my old Malibu double It's thick and melts slow I thought about cutting it into strips I found my tin snips after I finished the job. By the way best duck tape ever made is 622 shurtape I personally used to use it to mask new windows on building's. Put it on one time and take it off after finish. No glue residue from tape __________________ Duke Mitchell Last edited by MITCHELL; 03-06-2019 at 06:17 PM.

03-05-2019, 08:58 PM	#5
Reiner Member Join Date: Apr 2016 Posts: 71	It's a fishing website. Keep your political BS to yourself and off the forum.

03-06-2019, 05:42 AM	#7
Hunters Pa Senior Member Join Date: Jul 2006 Location: Fullerton Posts: 1,360	I like the metal mesh reinforcement. What is the beige paste, glue? I have welded my share of cracks, but using a soldering iron and zip ties or trimmings from previous installs for material