![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Aug 2015
Posts: 40
|
Technical question regarding interfering signals....
My buddy and I both have Lowrance Chirp sonars on our kayaks. I have an older Elite4x Chirp and he has a brand new Hook4. If we are paddling within several feet of each other, and we are both running the chirp (or even just the sonar) functions on the FF's, will the signals interfere with each other? Will the tracking display for the bottom contours get distorted because the systems are confusing each others signals? If so, how close can you be to similar units without this happening? I realize it's not a huge deal, and we can probably just stay 20' apart or so. I'm just curious if anyone on here has ever experienced anything like this. Thanks guys.... |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2005
Location: Grants Pass, OR
Posts: 1,903
|
MY buddy and I both have Lowrance Elites. If we are close I get vertical lines running at a slight diagonal. I can still see the bottom.
__________________
Amish Ed You can't catch it again if it's dead! |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Aug 2015
Posts: 40
|
Interesting
Thanks Ed. I thought for sure if we were too close it would have to create some sort of interference. Especially if they are like units, and they are operating on on identical frequencies.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2007
Location: Palos Verdes
Posts: 1,851
|
yes
Yes you will get intereference between the two units if you are too close.
__________________
Jim / Saba Slayer ![]() |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
|
+1
It's basically the equivalent of audio feedback.... |
![]() |
![]() |
![]() |
#6 |
donkey roper
Join Date: Apr 2009
Location: Pacific Beach
Posts: 968
|
you can get interference from a lot more than 20' away... there are a few things you can do.
1. have one person run 83kHz, and the other person run "mid chirp". This will still produce some feedback, but it will lessen it. 2. turn up the "noise rejection" filter on your units. 3. If you want to work an area close together, have one person run 83 and the other run 200 kHz. All said, you can still read the returns through the feedback. After you stare through the feedback for several hours, you hardly notice it. |
![]() |
![]() |
![]() |
#7 | |
Junior
Join Date: Aug 2017
Posts: 1
|
Quote:
I'm the buddy in question. I like the idea of running different frequencies and working an area. Thanks. |
|
![]() |
![]() |
![]() |
#8 |
donkey roper
Join Date: Apr 2009
Location: Pacific Beach
Posts: 968
|
If you are in shallow enough water... like i'd say 80' or less... one person could also use downscan frequency 455 kHz as well. In some scenarios I like 455 more than 200. It has a wider beam, and does really well over kelp.
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Jan 2012
Posts: 2,526
|
cross talk
lots of articles on internet regarding this situation.
|
![]() |
![]() |
![]() |
|
|