transducer mounting revo 13 - Kayak Fishing Adventures on Big Water’s Edge

YakDout · 07-14-2013, 04:20 PM

Hey guys wondering if anyone has mounted their transducer directly in the water on a revo. The seat scuppers obviously look a little small but how about the rear? Trying to do it my self instead of buying the lowrance mount thing. Thanks

YakDout · 07-14-2013, 04:22 PM

I have a mark 4 83/200 with skimmer ducer

bus kid · 07-14-2013, 06:23 PM

http://www.bigwatersedge.com/bwevb/s...ad.php?t=18822

search is your friend

YakDout · 07-14-2013, 07:46 PM

Fixed ducer problem without even running to Home Depot.

YakDout · 07-14-2013, 07:48 PM

Another pic

YakDout · 07-14-2013, 07:51 PM

And another

YakDout · 07-14-2013, 07:53 PM

Final product from the top view

bus kid · 07-14-2013, 08:48 PM

Make sure that the bolt is not rubbing the inside of the scupper hard to see in the pics but if you used stainless steel it may puncture the kayak. looks good.

Quote:

Originally Posted by YakDout

And another

YakDout · 07-15-2013, 07:56 AM

I used the original transducer hardware. Assuming it is SS but to get the ducer tight to the bottom of the yak, the bolt is rubbing a little. Should I put some sort of material on the end of bolt and nut?

07-14-2013, 04:20 PM	#1
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	transducer mounting revo 13 Hey guys wondering if anyone has mounted their transducer directly in the water on a revo. The seat scuppers obviously look a little small but how about the rear? Trying to do it my self instead of buying the lowrance mount thing. Thanks

07-14-2013, 06:23 PM	#3
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	http://www.bigwatersedge.com/bwevb/s...ad.php?t=18822 search is your friend __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

07-14-2013, 04:22 PM	#2
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	I have a mark 4 83/200 with skimmer ducer

07-15-2013, 07:56 AM	#9
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	I used the original transducer hardware. Assuming it is SS but to get the ducer tight to the bottom of the yak, the bolt is rubbing a little. Should I put some sort of material on the end of bolt and nut?