Lowrance Scupper mount - Kayak Fishing Adventures on Big Water’s Edge

TEAMFISH · 06-19-2012, 06:11 AM

Any one try one of these yet? Thinking about giving it a shot on my OK Trident. My thru-hull is working pretty decent but always looking for the possibility of better results.

http://www.lowrance.com/About/Press-...unting-System/

JNAST13ST · 06-19-2012, 11:08 AM

Quote:

Originally Posted by TEAMFISH

Any one try one of these yet? Thinking about giving it a shot on my OK Trident. My thru-hull is working pretty decent but always looking for the possibility of better results.

http://www.lowrance.com/About/Press-...unting-System/

I just got mine done today havnt took it out yet but I'll keep you updated

TEAMFISH · 06-19-2012, 11:18 AM

Quote:

Originally Posted by JNAST13ST

I just got mine done today havnt took it out yet but I'll keep you updated

Nice, let me know. What kind of yak did you put it on? What kind of F/F?
Sorry for all the questions. I completely understand the concept but Lowrance states "fits most". I can see my lures drop at times and I only have a cheap little X4. Just shooting through the hull and not even wet. I can only imagine what I'll pick up with it directly in water.

smithers · 06-19-2012, 11:35 AM

Despire what it says on the packaging, they do not work with all the transducers. (50 vs. 83? I forget which one I've got but it's bigger and doesn't fit)

Siebler · 06-19-2012, 11:38 AM

We have done a whole bunch of them on a pretty wide selection of boats. The best I have seen is on the Malibu 2012 Xfactor, tucks up really nice.

The Ultra 4.3/4.7 was nice too just kinda hard to reach for install.

YakMedic · 06-19-2012, 12:23 PM

I installed one on an xfactor, and a tarpon 160. It worked well on both boats, I'm just very rough on my gear and didn't want to worry about smashing the transducer all the time. I switched back to an in hull grease mount.

TEAMFISH · 06-19-2012, 12:44 PM

Thanks for the replies. JNAST13ST, still want to hear from you.
I guess I'll "pop" the goop bond (Uuuugh) and see how the ducer' fits in the area that Ocean Kayak so kindly engineered into thier yaks.

bus kid · 06-19-2012, 02:44 PM

from the hobie forum.

http://www.hobiecat.com/forums/viewt...782&hilit=toro

"I am looking at going through the scupper holes on my PA. I was looking at the Lowrance scupper mount. Until I noticed that all it is is a modified sprinkler head. I had several extra Toro sprinkler heads in my garage and they are the same. Just a little modification. So before you spend $54 dollars on the the lowrance mount. take a look at the $1.50 sprinkler. Fits right in the scupper whole."

Yakin · 06-19-2012, 02:46 PM

Quote:

Originally Posted by bus kid

from the hobie forum.

http://www.hobiecat.com/forums/viewt...782&hilit=toro

"I am looking at going through the scupper holes on my PA. I was looking at the Lowrance scupper mount. Until I noticed that all it is is a modified sprinkler head. I had several extra Toro sprinkler heads in my garage and they are the same. Just a little modification. So before you spend $54 dollars on the the lowrance mount. take a look at the $1.50 sprinkler. Fits right in the scupper whole."

Now that is what you call a price saver!!!

TEAMFISH · 06-19-2012, 03:31 PM

"I am looking at going through the scupper holes on my PA. I was looking at the Lowrance scupper mount. Until I noticed that all it is is a modified sprinkler head. I had several extra Toro sprinkler heads in my garage and they are the same. Just a little modification. So before you spend $54 dollars on the the lowrance mount. take a look at the $1.50 sprinkler. Fits right in the scupper whole."
__________________

Quote:

Originally Posted by Yakin

Now that is what you call a price saver!!!

I'm liking it. May have something to add to the "share your inovations" thread

Yakin · 06-19-2012, 03:38 PM

Quote:

Originally Posted by TEAMFISH

I'm liking it. May have something to add to the "share your inovations" thread

If I even had a lowrance FF I would try it but I don't even have a FF yet

JNAST13ST · 06-19-2012, 05:25 PM

I finally got this back today from OEX, I had CJ install it cause didnt want to make any mistakes. it came out great still have not put it on the water but everything should be good. thanks CJ

mtnbykr2 · 06-19-2012, 05:51 PM

Nice yak porn right there....

TEAMFISH · 06-19-2012, 05:54 PM

Very clean. Thanks for posting pics.

JNAST13ST · 06-19-2012, 06:43 PM

Np, I thought the 4x would be small but it's perfect for her. Nice spot had to get the diamond mount for more space but it's worth every dollar I'll try to take pics this coming weekend in the bay

roadx · 06-19-2012, 06:55 PM

the old girls look'n sweeet. did you get a different cart? like the location of the sonar, i had it just a little forward of that.
might hit the bay (tidelands) with a bro, swell is picking up

JNAST13ST · 06-19-2012, 06:59 PM

This is what I wanted to get but dont have the patients to wait for 2 weeks . http://www.tallonsystems.com/view/ta..._for_lowrance/

Ddwineguy · 06-19-2012, 10:22 PM

Looks good. That cart looks familiar...

JNAST13ST · 06-20-2012, 06:35 AM

It works great man thanks How's your outback any upgrades yet? You should get the Tallinn setup its super clean

DarthFisherman · 06-21-2012, 10:31 AM

Wow, that looks really clean! I am have to go with that mount once I confirm that I botched my goop install!

06-19-2012, 06:11 AM	#1
TEAMFISH Team Kayak Obesessions Join Date: Apr 2011 Location: Torrance Posts: 256	Lowrance Scupper mount Any one try one of these yet? Thinking about giving it a shot on my OK Trident. My thru-hull is working pretty decent but always looking for the possibility of better results. http://www.lowrance.com/About/Press-...unting-System/

06-19-2012, 11:38 AM	#5
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	We have done a whole bunch of them on a pretty wide selection of boats. The best I have seen is on the Malibu 2012 Xfactor, tucks up really nice. The Ultra 4.3/4.7 was nice too just kinda hard to reach for install. __________________ CJ Siebler

06-19-2012, 02:44 PM	#8
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	from the hobie forum. http://www.hobiecat.com/forums/viewt...782&hilit=toro "I am looking at going through the scupper holes on my PA. I was looking at the Lowrance scupper mount. Until I noticed that all it is is a modified sprinkler head. I had several extra Toro sprinkler heads in my garage and they are the same. Just a little modification. So before you spend $54 dollars on the the lowrance mount. take a look at the $1.50 sprinkler. Fits right in the scupper whole." __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

06-19-2012, 05:51 PM	#13
mtnbykr2 Senior Member Join Date: Sep 2009 Location: newbury park ca Posts: 2,323	Nice yak porn right there.... __________________

06-19-2012, 06:43 PM	#15
JNAST13ST Living Da Dream! Join Date: May 2012 Location: SAN DIEGO Posts: 414	Np, I thought the 4x would be small but it's perfect for her. Nice spot had to get the diamond mount for more space but it's worth every dollar I'll try to take pics this coming weekend in the bay __________________ Don't tread on me

06-19-2012, 11:35 AM	#4
smithers Member Join Date: Apr 2012 Posts: 39	Despire what it says on the packaging, they do not work with all the transducers. (50 vs. 83? I forget which one I've got but it's bigger and doesn't fit)

06-19-2012, 12:23 PM	#6
YakMedic Senior Member Join Date: Feb 2011 Location: Wrightwood Posts: 623	I installed one on an xfactor, and a tarpon 160. It worked well on both boats, I'm just very rough on my gear and didn't want to worry about smashing the transducer all the time. I switched back to an in hull grease mount.

06-19-2012, 12:44 PM	#7
TEAMFISH Team Kayak Obesessions Join Date: Apr 2011 Location: Torrance Posts: 256	Thanks for the replies. JNAST13ST, still want to hear from you. I guess I'll "pop" the goop bond (Uuuugh) and see how the ducer' fits in the area that Ocean Kayak so kindly engineered into thier yaks.

06-19-2012, 05:54 PM	#14
TEAMFISH Team Kayak Obesessions Join Date: Apr 2011 Location: Torrance Posts: 256	Very clean. Thanks for posting pics.

06-19-2012, 06:55 PM	#16
roadx . Join Date: May 2010 Posts: 1,155	the old girls look'n sweeet. did you get a different cart? like the location of the sonar, i had it just a little forward of that. might hit the bay (tidelands) with a bro, swell is picking up __________________

06-19-2012, 06:59 PM	#17
JNAST13ST Living Da Dream! Join Date: May 2012 Location: SAN DIEGO Posts: 414	This is what I wanted to get but dont have the patients to wait for 2 weeks . http://www.tallonsystems.com/view/ta..._for_lowrance/ __________________ Don't tread on me

06-19-2012, 10:22 PM	#18
Ddwineguy Senior Member Join Date: Apr 2012 Location: san diego Posts: 210	Looks good. That cart looks familiar...

06-20-2012, 06:35 AM	#19
JNAST13ST Living Da Dream! Join Date: May 2012 Location: SAN DIEGO Posts: 414	It works great man thanks How's your outback any upgrades yet? You should get the Tallinn setup its super clean __________________ Don't tread on me

06-21-2012, 10:31 AM	#20
DarthFisherman Member Join Date: May 2012 Location: San Diego Posts: 74	Wow, that looks really clean! I am have to go with that mount once I confirm that I botched my goop install!