|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
|
Thread Tools | Display Modes |
10-03-2011, 09:25 AM | #1 |
Member
Join Date: Dec 2008
Location: south orange county
Posts: 84
|
rigging your kayak for hooping, hobie.
|
10-03-2011, 09:35 AM | #2 |
Kayaker
Join Date: Mar 2005
Location: Big Rock, WindanSea, La Jolla
Posts: 413
|
Hooping La Jolla seminar showing some rigging on the Revo.
http://www.youtube.com/watch?v=Sn-fb...layer_embedded
__________________
Larry. Hobie Revolution 13. 25 years of kayak fishing La Jolla. https://larryl.com/photos |
10-03-2011, 10:06 AM | #3 |
Member
Join Date: Dec 2008
Location: south orange county
Posts: 84
|
that was PERFECT
good looking out, thanks.
|
10-05-2011, 09:08 AM | #4 |
Senior Member
Join Date: May 2011
Location: Orange County, ca
Posts: 684
|
damn it all this time all i needed was a hobie bait tank to hold the nets in place
|
10-05-2011, 09:30 AM | #5 |
Kayaker
Join Date: Mar 2005
Location: Big Rock, WindanSea, La Jolla
Posts: 413
|
The Hobie tanks* work great for net carrier, esp. the Ambush nets, and
also provide good lobster storage (or dry storage) inside. They make great bait tanks during the day of course too... Make sure you add short bungies connected to the kayak under your nets, one bungie cord hook on each side of the tank. When traveling with nets onboard, stretch these bungies up THROUGH the netting of ALL hoops near the net edge, and lock the bungie hook over the top net's support bars to hold them all tightly in place. Of course your tank should be tightly secured to the boat as well. This is a little more difficult to hook/unhook, but if you tip sideways when launching and landing, you will be very glad you did it. Remember the nets make your kayak a little more top heavy, so I would never try to launch through much 'surf' with my nets onboard. * People complain that the tanks are too expensive ... but my experience is by the time you get done building your own with materials, tools, drill bits, & time involved, you end up with something that will work most of the time AND has ISSUES, and co$t plenty too. I spent years messing with my own contraptions before convincing/helping Hobie with their tank design back in 2005/2006. I really, really need mine to work EVERY TIME I fish. P.S. If you are being sarcastic on the forum, it helps to add the . : ) I enjoy sarcasm. Last edited by blackcloud9; 10-05-2011 at 10:37 AM. |
10-06-2011, 09:16 AM | #6 |
Senior Member
Join Date: May 2011
Location: Orange County, ca
Posts: 684
|
no sarcasm here sir....I have been looking at them pc pipe hoop net racks and been blueprinting my own and all along the solution was already seating in front of me well in back of me
|
|
|