For those with Livewell pumps on Stealth series

[dsafety]

Originally Posted by hook1fred

My hobie LW is very quiet I normally have to check to see if it's still on.... now it it weren't so difficult to prime i'd be golden

I found a way to easily prime a Hobie tank. The solution will probably work with any scupper-fed pump. Check out post number 36 in the Innovations thread. After adding the angle adapter shown in that post, simply carry a piece of pipe, (I use a sprinkler riser), that will fit in the plastic tubing.

If your intake ever gets plugged up, blow some air through the system. If you cannot get the pump to prime, suck a little water in. This thing works great.

Bob

[RK]

Not to thread jack but ive gotta know, the tsunami pump (same as stealth) in the hobie tank on mine is quiet but the tank itself with that white overflow drain pipe makes a loud gurgling sound like a bong, not that I dont like this sound but it is a bit noisy, definatley loud enough for me to bring up, now do you guys not experience that, im wondering if theres a may to silence that?

[Handymansd]

Originally Posted by RK

Not to thread jack but ive gotta know, the tsunami pump (same as stealth) in the hobie tank on mine is quiet but the tank itself with that white overflow drain pipe makes a loud gurgling sound like a bong, not that I dont like this sound but it is a bit noisy, definatley loud enough for me to bring up, now do you guys not experience that, im wondering if theres a may to silence that?

I drilled 4 3/8" holes at the top of my tube so that the water does not "bubble" quite as loudly... still not as silent as a kayatank but is far better than it was.

[RK]

Yeah thanks mine has the holes pre drilled but its still a bit loud just seeing if anything else can be done. I may try drilling a couple more lower that way the holes will act as the drain as opposed to the holes being the secondary drain and the main hole of the pipe being the primary drain. Were trying to be stealth here people or we'd all be on hatteras's oh yeah that and the 500k

Originally Posted by Handymansd

I drilled 4 3/8" holes at the top of my tube so that the water does not "bubble" quite as loudly... still not as silent as a kayatank but is far better than it was.