![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Sep 2009
Location: newbury park ca
Posts: 2,323
|
excellent job on the live well John, almost looks like you bought it that way, nice craftsmanship, nice report too...
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2010
Location: Alhambra
Posts: 506
|
yaksailer, that is a nice tank. from the pictures it looks like you ran the battery wire thru your hull? also noticed that you had a hobie hatch on it, may i ask why not run the inlet thru the scupper and up into the tank like hobies?
could you take some more pictures of your setup? it looks real clean. thanks |
![]() |
![]() |
![]() |
#3 | |
Member
Join Date: Mar 2005
Posts: 66
|
Quote:
Yes, it does have a Hobie hatch and the wire goes through the hull to the one 12-volt battery. I really did debate whether to run both the fill and drain through the scuppers. I decided not to, since the scupper pump requires you to pedal forward to prime. The pump must run continuously to stay primed. Thus, you'll need a really big 12 volt battery, or a second 6-volt battery. I don't want to carry more than one battery. Plus, I want to be able to access the inlet if it gets clogged with kelp or eelgrass. A scoop type inlet seems like it wouldn't have enough screen filter area to prevent clogging (to me anyways). Also, knowing me, I would inevitably land with the scoop sticking out below my hull. If I could figure out a way to use the scupper without having a periscope sticking below the hull, with ample filter area, I might do it for Austin's kayak. I'll try to take some more pics tonight after I get home. |
|
![]() |
![]() |
![]() |
#4 | |
Senior Member
Join Date: Sep 2009
Location: newbury park ca
Posts: 2,323
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#5 | |
Member
Join Date: Mar 2005
Posts: 66
|
Quote:
My 12 volt cell is in a Lock-n-Lock box. It's like it was made for this cell with 2 fuse holders: ![]() ![]() It's a pretty standard mounting method, except for the dog collar. Yeah, the wiring is sloppy. I will be rewiring this soon. Goop works well, though. My first timer broke, but OEX replaced it, no problem. I think maybe I didn't have it sealed well enough. I gooped up the wire side and put electronics grease on the cap: should be good now. ![]() I bought the Hobie drain to save time, but it turns out that I had to file out the ID of the collar. The tube didn't fit. Better to just buy a bulkhead fitting and 3/4" PVC tube. ![]() Outside view. It does slide up and down to adjust the tank level. ![]() Yeah, it's just a cheap 5 gallon diesel tank. It's sturdy, though. The spout cap really is useful for draining the tank. You really want a large drain. A little fill cap like the kind on a squirt gun won't cut-it when your ling coughs up an octopus or something worse. ![]() One last thing: IMO Hobie kayaks are the best. I've owned 3 and would buy another. Last edited by yaksailor; 06-14-2011 at 08:53 PM. |
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2009
Posts: 108
|
where did you get the locking tupperware?? I need one and I can't find them anywhere!
|
![]() |
![]() |
![]() |
#7 |
Member
Join Date: May 2011
Location: Orange Ca
Posts: 60
|
|
![]() |
![]() |
![]() |
|
|