Share Your Innovations

[Flyfisher70]

These are just some things I've seen and read about on this site and others. Lots of cool innovations for sure. I wish I could have contributed some of my own ideas, but I'm just not one of the creative type. Anyhow I hope these photos can help others out as past images and instructions have helped me out.

Bait tank battery box mounted directly onto the crate with zip ties. I drilled out two holes for each zip tie on the inside of the box (a total of four zip ties were used), once the zip ties were through the battery box and tight to the box I added marine goop to keep the water from entering through the holes.


I'm using this type of deck connector from the bait pump to the battery box. It seem like it could come unplugged really easy but we'll just wait and see how it works out.




The other side of the battery box has a toggle switch for turning the power on and off as needed.


ABS pipe cut to about twelve inches and then zip tied to the crate. The small cord is for tying down the rods just in case I roll while out on the water, so hopefully I will not loose any of my gear.


On the Vittles Vault bait tank I drilled some small drain holes, these work perfect with the Rule 360 bilge/bait pump and a 6v 7ah battery with the Mojo timer set at a fifteen seconds on and fifteen seconds off cycle.


On the lid of the bait tank I drilled out a small hole to put the cord through so that I will not accidentally loose the lid while on the water or land for that matter.


This just a small knot tied on the inside of the lid, simple yet effective.


Thanks for the great ideas guys!