![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Ancient Member
Join Date: Feb 2007
Location: On The Water
Posts: 935
|
I used a Paslode framing nailer to attach mine...
![]() Seriously, A little sanding and careful work especially around the edges with marine goop should do the trick. The expansion and contraction of the PVE in cold water and hot sun means that a flexible adhesive like marine goop would probably work best. You could also have them printed onto Vinyl and then attach that to your sleigh, expensive but doable. Or you could just take the motor off... inexpensive, healthy, and safe! ![]() Cheers... |
![]() |
![]() |
![]() |
#2 |
Vampyroteuthis infernalis
Join Date: Nov 2005
Posts: 585
|
Correct me if I'm wrong but if I remember correctly you don't need to register your boat, or have CF numbers, unless your boat has a GASOLINE engine?
__________________
____________________________________________ |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Aug 2009
Posts: 192
|
|
![]() |
![]() |
![]() |
#4 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
I concur with the "any motor" requiring a CF number, as well as the recommendation for a thin layer of marine goop. Course sandpaper to scuff the kayak surface. Shot peened kayak surfaces that are dimpled, do not work well with just the adhesive on the sticker.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#5 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
I concur with the "any motor" requiring a CF number, as well as the recommendation for a thin layer of marine goop. Coarse sandpaper to scuff the kayak surface. Shot peened kayak surfaces that are dimpled, do not work well with just the adhesive on the sticker.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Dec 2006
Location: San Carlos
Posts: 202
|
I dont remember where it was or if it was even a CA kayak, but I remember seeing someone with a pic of their yak with a trolling motor, and they had their registration numbers on a piece of wood that was attached to their crate behind their seat.
I would check with the harbor police and see if something like that is allowed.
__________________
if your brain had fists, you could only hurt yourself! |
![]() |
![]() |
![]() |
#7 |
Olivenhain Bob
Join Date: May 2008
Location: Olivenhain, CA
Posts: 1,122
|
So a kayak with an electric motor like a Torque or eVolve requires a CF number? Do you need a different license if you go to another state? What if you travel all over the country?
Amazing! I know a couple of guys who are breaking the law every time they hit the water. Pretty soon they will start regulating toilet paper. Very disappointing. Bob |
![]() |
![]() |
![]() |
#8 | ||
Senior Member
Join Date: Aug 2009
Posts: 192
|
Quote:
Quote:
Anyway I agree its ridiculous regulation and they should consider electric motors up to a certain HP rating to be the same as human powered non-vessel. |
||
![]() |
![]() |
![]() |
|
|