PA vs Revo

[sandydiego]

Originally Posted by WahooUSMA

On another note: For those that have the PA's - Do you find that the hatches leak? My seals leaked more than a hooker in a two bit German whore house! The liner in the front hatch was almost 1/2 full after launching through the small surf!

I upgraded my hatch seals with Moore Industrial Hardware1-800-543-1677 Item #7100-1/16C

Look at the difference:
Pro Angler Hatch Leak

[Nic D]

My cousin and I fished most of sat and 10 hours yesterday with not a drop in the PA.

[dsafety]

Originally Posted by sandydiego

I upgraded my hatch seals with Moore Industrial Hardware1-800-543-1677 Item #7100-1/16C

Look at the difference:
Pro Angler Hatch Leak

Do you think this thicker gasket would work on a Revo as well? Does it just slip over the plastic hatch edge like the stock gasket? This looks like it might be a great upgrade.

Anyone who has experience with it, please jump in.

Bob

[sandydiego]

Originally Posted by dsafety

Do you think this thicker gasket would work on a Revo as well? Does it just slip over the plastic hatch edge like the stock gasket? This looks like it might be a great upgrade.

Anyone who has experience with it, please jump in.

Bob

It should. It is the same mount as the stock seal. I'll look ant 467echo's revo tomorrow.

[WahooUSMA]

Originally Posted by sandydiego

I upgraded my hatch seals with Moore Industrial Hardware1-800-543-1677 Item #7100-1/16C

Look at the difference:
Pro Angler Hatch Leak

Quick question: When I looked at the diagram, it looks like the 'bulb' (seal) is side mounted on the channel piece, not on top where it will create the seal....have you received your order yet?

I just want to make sure before I place my order. Gracias

#7100-1/16C

[sandydiego]

Originally Posted by WahooUSMA

Quick question: When I looked at the diagram, it looks like the 'bulb' (seal) is side mounted on the channel piece, not on top where it will create the seal....have you received your order yet?

I just want to make sure before I place my order. Gracias

#7100-1/16C

They show the #7100-1/16A that is on the side of the clip on the web site. You want the #7100-1/16C it is attached to the top edge of the clip. Since the upgrade with the new seal I have had a completely dry hull.

Looking forward to fishing this weekend! Last day of Cub Scout camp today.

[WahooUSMA]

Originally Posted by sandydiego

They show the #7100-1/16A that is on the side of the clip on the web site. You want the #7100-1/16C it is attached to the top edge of the clip. Since the upgrade with the new seal I have had a completely dry hull.

Looking forward to fishing this weekend! Last day of Cub Scout camp today.

I'll be out there tomorrow morning.

[sandydiego]

Originally Posted by WahooUSMA

I'll be out there tomorrow morning.

I need a day to recover!