|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
|
Thread Tools | Display Modes |
05-21-2010, 11:07 PM | #1 |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
Slowly but Surely
I replaced the existing bait tank with a food vault/container and installed the pump on the inside with an anti-siphon valve to prevent any backflush. still need to get some nylon nuts to fasten the pump and some elbow and hose for the drain. I decided to not place the battery box for the FF in the hull and instead mounted the FF to the Pelican box, just need a some waterproof nuts to run the ducer cable from the hull to the FF. I decided to do a wet mount and install a 4" abs pipe which was cut to match the hull design and Gooped. I let it sit for 24hrs+ and fill it with water to check for leaks, it's all good!! I had a crate sitting around and decided to cut it so that it could fit right between the bait tank and the seat. I used a left over piece to make a top for, just need mount it. I still have space behind the bait tank for a cooler or additional storage. On sunday we're heading to Westmarine and OEX to buy some additional items: NRS Chinook PFD, hardware, vhf radios, etc. We're planning on doing a local run next weekend and will fish the Portugese Bend area, we're staying close to shore for now. Hope to post some additional pics once we're up and running. |
05-21-2010, 11:41 PM | #2 |
Member
Join Date: Sep 2009
Posts: 90
|
maybe
a little top heavy and forward blockage bow heavy ? innovative none the less. good stuff and good luck.
|
05-22-2010, 01:22 AM | #3 |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
What do you mean? The bait tank is only 13.25" H and the Pelican box and FF mount will sit below my line of site. The bait tank sits lower than the most of the bucket style tanks that I've seen and the waterline will sit no higher than 3/4 of the tank. Help me understand what you mean so that I can make adjustments, if necessary.
Last edited by jorluivil; 05-22-2010 at 06:12 AM. |
05-22-2010, 06:46 AM | #4 |
Olivenhain Bob
Join Date: May 2008
Location: Olivenhain, CA
Posts: 1,121
|
I think the the Fabulous one might have meant that with that big battery box between you and your front hatch, you might have a little trouble sliding to the bow and reaching stuff stored in that area.
Other than that I think everything looks great. Very clean. Where are you going to mount rod holders, on the crate? If you do, keep in mind that you will have to reach through the stored rods to get to your bait tank. I prefer cinch straps to bungees for holding things like bait tanks and storage crates in place. You may find that the first time you do the El Rollo, the bungees will stretch too much and stuff might start falling off. Bob |
05-22-2010, 08:32 AM | #5 |
Senior Member
Join Date: Apr 2010
Posts: 175
|
I'm curious about the livewell pump...do those work when fully submerged in water all day? I'm just curious about the electrical connections on that style of pump. I've never seen one actually mounted inside of the tank. Does the hobie livewell have a similar set up?
|
05-22-2010, 08:32 AM | #6 | |
Senior Member
Join Date: Jul 2007
Location: San Pedro
Posts: 999
|
looking good, Jorluivil
Quote:
__________________
|
|
05-22-2010, 08:51 AM | #7 | |
Senior Member
Join Date: Oct 2009
Location: Wildomar, CA.
Posts: 294
|
Quote:
I have a Hobie tank and yes it's inside and works great. Honestly there is no difference in how they work, just where they are located. |
|
05-22-2010, 07:07 PM | #8 |
Senior Member
Join Date: Apr 2010
Posts: 175
|
|
05-25-2010, 12:19 PM | #9 |
Senior Member
Join Date: Oct 2009
Location: Wildomar, CA.
Posts: 294
|
I found out just by wanting to clean the pump off that I had some scales and grass collected in the impeller of the pump. You should be able to take the pump apart for maintenance so you can clean out the junk.
|
05-25-2010, 12:39 PM | #10 |
Senior Member
Join Date: Mar 2009
Posts: 520
|
Very nice, I like your fish finder setup. I used to have that kayak, And couldnt find anythign worth a damn to fit in that "designated plano box" spot. That milkcrate is pretty cool, where did you find it?
The bottom pump on the bait tank is a super sweet I did soemthing very similuir when I had that yak. Very sweet setup. |
05-25-2010, 11:01 PM | #11 |
Senior Member
Join Date: Mar 2009
Posts: 2,384
|
I agree with Bob on the cinch straps vs. bungees to tie down the crate and bait tank. Might attach rod holders right to the sides and/or back of the bait tank with the same lock nuts not to interfere with bait tank access. Where is your battery for the bait tank located?
|
05-25-2010, 11:15 PM | #12 | |||
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
Quote:
Quote:
Quote:
I'll take some additional pics this week and post them. |
|||
|
|