spectra

[dick fabulous]

I have always fished mono P line. Besides the spectra being stronger than mono what are some of the differences in performance? I want to cut some kelp too!

[Lets_Fish]

I'm sure this would fall under "it depends", but in general how much fluorocarbon do you add 25, 50, more or less yards onto of your spectra?

[Jimmyz123]

Originally Posted by dick fabulous

I have always fished mono P line. Besides the spectra being stronger than mono what are some of the differences in performance? I want to cut some kelp too!

If I'm reading this correctly you're asking what is the real difference with Mono to Braid, correct?

If that's the case then the best way to say it is you will feel everything with braid. I too still fish mostly mono, but when I'm fishing deep, or in around the kelp or other structure I'll use Braid with a Floro leader as most others do.

If you have not fished braid I recommend getting a spool of spider wire from wal-mart for about $12, 150 yards, and give it a try. I like it in the 30# to 65# class. Fish some bottom structures and you'll see how much you feel. Keep in mind that this stuff can cut through kelp, fingers, and other things so when pulling your knots tight use somrthing to grip the braid with to pull, don't wrap it around your fingers to pull down really tight it will cut you.

Also when casting braid, make sure it was loaded tight on the spool, and that you don't get any backlashes, it can be difficult to clear up these in braid. Other than that, have fun with it.

[Siebler]

If you fish the Natural white colored Spectra from Izorline it will last much longer as there is no Dyed Wax coating to come off. It also casts much better and is more limp.

[dick fabulous]

Again thanks for the info. Smaller better like it may fluff on spool when oops casting or retrieving ? Glue all knots ? 10 feet flouro at a time right idea ?

[Jimmyz123]

Originally Posted by dick fabulous

Again thanks for the info. Smaller better like it may fluff on spool when oops casting or retrieving ? Glue all knots ? 10 feet flouro at a time right idea ?

Always, if possible, try to keep the line as tight on the spools as you can. Also when spooling up the line be sure that it is anchored well to the spool to avoid slipping. Many will spool up a couple feet of mono first as a buffer to the spool, and then fill with the braid. Personally when adding leaders I go 10' at the most, and never have had any problems hooking up of landing fish. I've never glued my knots but I have heard of people doing so. When casting braid, practice and practice, you really don't want any over runs. Jim Sammons has a great video on Youtube about the best way to cast a conventional reel. After watching that video and applying it to my casting, I have notice huge results, further casting, less effort, and no over runs.
http://www.youtube.com/watch?v=1s1Rwwcmkzc

http://www.youtube.com/watch?v=NOYYPQoHypk