The External Kayatank prototype brought to you from your friends at OEX - Kayak Fishing Adventures on Big Water’s Edge

JrBasser · 11-06-2008, 11:58 AM

Yea Moyer that was my initial thought too, but cj and Matty were afraid the pump would need to be primed. I still think it would work.

Siebler · 11-06-2008, 12:19 PM

The pump WILL need to be primed and if using a timer you will need a check valve.

Also this eliminated more free space in the tank and gives more hard items for the bait to beat themselves up on. In addition becasue the tank is soft we would need to make a hard bottom on it to keep it upright.

11-06-2008, 11:58 AM	#1
JrBasser Senior Member Join Date: May 2006 Posts: 260	Yea Moyer that was my initial thought too, but cj and Matty were afraid the pump would need to be primed. I still think it would work. Last edited by JrBasser; 11-06-2008 at 12:34 PM.

11-06-2008, 12:19 PM	#2
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	The pump WILL need to be primed and if using a timer you will need a check valve. Also this eliminated more free space in the tank and gives more hard items for the bait to beat themselves up on. In addition becasue the tank is soft we would need to make a hard bottom on it to keep it upright. __________________ CJ Siebler