Plano Box for Prowler 13 - Kayak Fishing Adventures on Big Water’s Edge

Sebastian · 10-06-2008, 03:17 PM

Thanks all.

If possible, can you post pictures of your installs for FF and accessories. I am most interested in how you all are making the most use of the limited space up front.

Thanks again!

prowlerdude · 10-06-2008, 03:39 PM

Here is what I did. I got a diamond mount for the rail and put the FF there and then put a RAM revolution in the middle spot. I also have the "tub" also. I used cut outs from an old ("Honey have you seen the cutting board") cutting board as backing for strength. I run the fishfinder off rechargeable AA batteries and keep them in a small drybag. I mounted the transducer in goop and have had no problem.

Hope this helps

Mike

dgax65 · 10-06-2008, 04:39 PM

When I had a Prowler I used the Plano box for the battery and my tackle. I also put the switches in the little compartment on the lid of the box.

On one of my Prowlers I put the FF forward of the center console. I used RAM and Tight-Lok articulated rod holders.

My first Prowler had a RhynoBar similar to the ones installed on the Drifter and X-Factor in the picture above. I think the RhynoBar set-up was the most effective of the various versions.

prowlerdude · 10-06-2008, 04:45 PM

RhinoBar looks pretty cool. That would sure save a lot of space

Sebastian · 10-06-2008, 07:52 PM

Thanks for the quick reply guys. I appreciate the help! I bought the Scotty bar and some accessories and will give that a try. Just have to find the time to mount them and test....

10-06-2008, 04:39 PM	#3
dgax65 Guerro Grande Join Date: Jan 2006 Location: Houston, TX Posts: 629	When I had a Prowler I used the Plano box for the battery and my tackle. I also put the switches in the little compartment on the lid of the box. On one of my Prowlers I put the FF forward of the center console. I used RAM and Tight-Lok articulated rod holders. My first Prowler had a RhynoBar similar to the ones installed on the Drifter and X-Factor in the picture above. I think the RhynoBar set-up was the most effective of the various versions. __________________ Douglas Gaxiola Team No Fish- Amateur Staff

10-06-2008, 03:17 PM	#1
Sebastian Member Join Date: Jul 2005 Location: Carlsbad Posts: 35	Thanks all. If possible, can you post pictures of your installs for FF and accessories. I am most interested in how you all are making the most use of the limited space up front. Thanks again!

10-06-2008, 03:39 PM	#2
prowlerdude Senior Member Join Date: May 2007 Location: Clairemont Posts: 116	Here is what I did. I got a diamond mount for the rail and put the FF there and then put a RAM revolution in the middle spot. I also have the "tub" also. I used cut outs from an old ("Honey have you seen the cutting board") cutting board as backing for strength. I run the fishfinder off rechargeable AA batteries and keep them in a small drybag. I mounted the transducer in goop and have had no problem. Hope this helps Mike

10-06-2008, 04:45 PM	#4
prowlerdude Senior Member Join Date: May 2007 Location: Clairemont Posts: 116	RhinoBar looks pretty cool. That would sure save a lot of space

10-06-2008, 07:52 PM	#5
Sebastian Member Join Date: Jul 2005 Location: Carlsbad Posts: 35	Thanks for the quick reply guys. I appreciate the help! I bought the Scotty bar and some accessories and will give that a try. Just have to find the time to mount them and test....