Dialing in my Camo

[SHRED]

Originally Posted by fourtogo

Remove Transducer cover >> three screws <<< run some anti seize on them . Hobie runs them in DRY Stainless in brass / bronze. . Mine has burrron heads in counter sunk cover . This a new 2017 stupid in my opinion right from dealer .

Thanks for that tip.
You do this because of the fact that they are dissimilar alloys and will react with each other?

[fourtogo]

Originally Posted by SHRED

Thanks for that tip.
You do this because of the fact that they are dissimilar alloys and will react with each other?

Stainless has the unique qualities to WELD Its self . Even when hand tighten too just bout any other metal . Add salt water in the mix makes normal . In to a large issue , care should be taken with dissimilar metals . A Kayak is not a cheap investment