Hobie bait tank priming issue - Kayak Fishing Adventures on Big Water’s Edge

FISH11 · 06-02-2017, 12:14 PM

If hou have the RIGHT LENGTH tube, depending on kayak model, PA's need the longer one. Unless you use the tank on different Hobies, you shouldn't have to change it. Make sure the opening is facing forward. Move forward turn on the pump and all is fine. The piss off is the frickin eel grass that gets in and once dry it slows or stopping the pump. I tried adding a screen but its hard to find one with small enough openings and large enough to not plug up with other kelp debris.

06-02-2017, 12:14 PM	#1
FISH11 Member Join Date: Aug 2013 Location: Pine Valley when not fishing La Jolla Posts: 2,643	If hou have the RIGHT LENGTH tube, depending on kayak model, PA's need the longer one. Unless you use the tank on different Hobies, you shouldn't have to change it. Make sure the opening is facing forward. Move forward turn on the pump and all is fine. The piss off is the frickin eel grass that gets in and once dry it slows or stopping the pump. I tried adding a screen but its hard to find one with small enough openings and large enough to not plug up with other kelp debris. __________________ MARK ......... 2016 MALIBU X FACTOR, 2020 SOLO SKIFF (Fishing Kayak on Steroids ) Last edited by FISH11; 06-04-2017 at 02:23 PM.