Raymarine Dragonfly 4 and 5 on Hobie - Kayak Fishing Adventures on Big Water’s Edge

Iceman · 05-09-2015, 11:03 AM

found a video for reference and cut out the mount on the cover plate. Transducer is just wedged into place when the cover is put on.

tsugg · 05-09-2015, 11:32 AM

Andy, can you take a pic of the back of the unit?

Iceman · 05-09-2015, 12:14 PM

tsugg · 05-09-2015, 04:17 PM

That's sick where can I get those fittings??

surf-bum · 05-19-2015, 09:32 AM

How do you like the fishfinder?

octico · 05-19-2015, 09:37 AM

That's how I setup mine and it works perfect. Be sure to rinse out where the transducer is located, it tends to collect sand real easy

bolocop · 05-19-2015, 12:12 PM

That's why I drilled holes in my lowrance ready cover plate. It accumulated too much silt/sand. If you don't like the holes, you can buy a replacement for $10.

octico · 05-19-2015, 12:17 PM

Quote:

Originally Posted by bolocop

That's why I drilled holes in my lowrance ready cover plate. It accumulated too much silt/sand. If you don't like the holes, you can buy a replacement for $10.

Good point!

Apex · 05-26-2015, 06:12 PM

I'm waiting on my 4pro in the mail what size ram ball and arm is this ?

Iceman · 05-27-2015, 06:53 AM

1 inch ball and 4 inch arm

05-09-2015, 11:03 AM	#1
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	Raymarine Dragonfly 4 and 5 on Hobie found a video for reference and cut out the mount on the cover plate. Transducer is just wedged into place when the cover is put on. __________________

05-09-2015, 11:32 AM	#2
tsugg LOWSPARK Join Date: Dec 2013 Location: CARLSBAD Posts: 251	Dragon Andy, can you take a pic of the back of the unit?

05-09-2015, 12:14 PM	#3
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	__________________

05-09-2015, 04:17 PM	#4
tsugg LOWSPARK Join Date: Dec 2013 Location: CARLSBAD Posts: 251	I'm in!! That's sick where can I get those fittings??

05-26-2015, 06:12 PM	#9
Apex Senior Member Join Date: Jun 2014 Location: Riverside Posts: 130	I'm waiting on my 4pro in the mail what size ram ball and arm is this ? __________________ Louis

05-19-2015, 09:32 AM	#5
surf-bum Member Join Date: Jun 2011 Posts: 49	How do you like the fishfinder?

05-19-2015, 09:37 AM	#6
octico Senior Member Join Date: Mar 2014 Location: The city of Orange Posts: 1,278	That's how I setup mine and it works perfect. Be sure to rinse out where the transducer is located, it tends to collect sand real easy

05-19-2015, 12:12 PM	#7
bolocop Senior Member Join Date: Aug 2012 Posts: 332	That's why I drilled holes in my lowrance ready cover plate. It accumulated too much silt/sand. If you don't like the holes, you can buy a replacement for $10.

05-27-2015, 06:53 AM	#10
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	1 inch ball and 4 inch arm __________________