looking for a new setup!!!! - Kayak Fishing Adventures on Big Water’s Edge

benichi · 03-26-2015, 12:33 PM

looking in to getting a new setup for throwing irons on surface and yoyo any ideas for rod and reel

TJones · 03-26-2015, 08:18 PM

If you can afford a 600 $ dollar setup? If you are on a budget , maybe a daiwa sealine . I have read some posts about how well they cast . Another great thing that makes them well suited for kayaking is the fact that they are not overly comlicated , which would make them easy to service .Hope this helps .

buddha · 03-26-2015, 08:40 PM

Wouldn't you need two setups?

One for surface and one for yoyo?

Some guys are using the Lexa 400 reel for both but you probably need two different rods.

nickc5 · 03-26-2015, 08:55 PM

$600 setup? Easy guy. You want something that can take a little beating once youre out on the water unless you don't mind making it rain on gear. Shimano Teramars (8-9ft) are relatively inexpensive at around 175. Sure calstars, phenix, seeker etc are nice rods, but you can get away with same type of setup that is much easier on the wallet. As for the reel, saltist, toriums, sealines, lexa 400 etc. It all depends on your budget.

But just like Buddha said, you'll need 2 different setups as they are more suitable for each application.

Check bloody decks classifieds for some steals. Picked up a new teramar for $100 a few weeks ago.

Sent from my iPhone using Tapatalk

nickc5 · 03-26-2015, 08:55 PM

7-8' Yo yo
8-9' Surface

Sent from my iPhone using Tapatalk

Cadillyak · 03-26-2015, 09:10 PM

Quote:

Originally Posted by nickc5

7-8' Yo yo
8-9' Surface

Sent from my iPhone using Tapatalk

Agreed!

Goose1993 · 03-27-2015, 05:57 PM

Ideally, you would want like a 7ft rod for yoyos and something about 8ft or bigger for surface irons.

But if you want an "all around" rod, go with a 7ft. It's the optimal length for yoyo and live bait if you choose to fish that route as well. You can also cast irons with it. Obviously, you'd be better off casting irons with a longer rod, but you'll be able to cast them just fine with a 7 footer. If you're only getting one rod, I'd do this add a longer rod to the arsenal later on when you can afford it.

Grafighters are great. But they are expensive. If you're on a budget, try the Californian you can get at Turners. They run around $100 and are good rods.

As for reels, I just started using Avets and will never use anything else. Try an Mx series. No need to get two speed or raptor models, just the basic one is amazing. Go to a tackle shop and check out the MXL and the Mxj and see what width you like better For your applications. If those are too much, check out Diawa Sealines.

benichi · 03-27-2015, 07:24 PM

Quote:

Originally Posted by Goose1993

Ideally, you would want like a 7ft rod for yoyos and something about 8ft or bigger for surface irons.

But if you want an "all around" rod, go with a 7ft. It's the optimal length for yoyo and live bait if you choose to fish that route as well. You can also cast irons with it. Obviously, you'd be better off casting irons with a longer rod, but you'll be able to cast them just fine with a 7 footer. If you're only getting one rod, I'd do this add a longer rod to the arsenal later on when you can afford it.

Grafighters are great. But they are expensive. If you're on a budget, try the Californian you can get at Turners. They run around $100 and are good rods.

As for reels, I just started using Avets and will never use anything else. Try an Mx series. No need to get two speed or raptor models, just the basic one is amazing. Go to a tackle shop and check out the MXL and the Mxj and see what width you like better For your applications. If those are too much, check out Diawa Sealines.

hey man thanks awesome reply....

YakDout · 03-27-2015, 08:44 PM

Avets are good for Yoyo and bait, but I would never buy one for surface jigs. Can be a pain for that. Adjusting freespool will change the drag adjustment as well. Also remember that changing your max drag on a lever drag requires the reel to be in freespool. So if you are fighting a fish with an avet and you hook a screamer that's about to spool you, to add max drag you would have to put the reel in freespool to make this adjustment.

03-26-2015, 12:33 PM	#1
benichi Senior Member Join Date: Mar 2015 Location: Riverside Posts: 102	looking for a new setup!!!! looking in to getting a new setup for throwing irons on surface and yoyo any ideas for rod and reel __________________

03-26-2015, 08:18 PM	#2
TJones Senior Member Join Date: Jan 2012 Posts: 2,526	Tranx up for sell If you can afford a 600 $ dollar setup? If you are on a budget , maybe a daiwa sealine . I have read some posts about how well they cast . Another great thing that makes them well suited for kayaking is the fact that they are not overly comlicated , which would make them easy to service .Hope this helps .

03-26-2015, 08:40 PM	#3
buddha Senior Member Join Date: Feb 2009 Location: chula vista Posts: 907	Wouldn't you need two setups? One for surface and one for yoyo? Some guys are using the Lexa 400 reel for both but you probably need two different rods.

03-26-2015, 08:55 PM	#4
nickc5 Senior Member Join Date: Oct 2014 Location: Placentia Posts: 186	$600 setup? Easy guy. You want something that can take a little beating once youre out on the water unless you don't mind making it rain on gear. Shimano Teramars (8-9ft) are relatively inexpensive at around 175. Sure calstars, phenix, seeker etc are nice rods, but you can get away with same type of setup that is much easier on the wallet. As for the reel, saltist, toriums, sealines, lexa 400 etc. It all depends on your budget. But just like Buddha said, you'll need 2 different setups as they are more suitable for each application. Check bloody decks classifieds for some steals. Picked up a new teramar for $100 a few weeks ago. Sent from my iPhone using Tapatalk

03-27-2015, 05:57 PM	#7
Goose1993 Senior Member Join Date: Mar 2015 Location: San Diego Posts: 115	Ideally, you would want like a 7ft rod for yoyos and something about 8ft or bigger for surface irons. But if you want an "all around" rod, go with a 7ft. It's the optimal length for yoyo and live bait if you choose to fish that route as well. You can also cast irons with it. Obviously, you'd be better off casting irons with a longer rod, but you'll be able to cast them just fine with a 7 footer. If you're only getting one rod, I'd do this add a longer rod to the arsenal later on when you can afford it. Grafighters are great. But they are expensive. If you're on a budget, try the Californian you can get at Turners. They run around $100 and are good rods. As for reels, I just started using Avets and will never use anything else. Try an Mx series. No need to get two speed or raptor models, just the basic one is amazing. Go to a tackle shop and check out the MXL and the Mxj and see what width you like better For your applications. If those are too much, check out Diawa Sealines.

03-27-2015, 08:44 PM	#9
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	Avets are good for Yoyo and bait, but I would never buy one for surface jigs. Can be a pain for that. Adjusting freespool will change the drag adjustment as well. Also remember that changing your max drag on a lever drag requires the reel to be in freespool. So if you are fighting a fish with an avet and you hook a screamer that's about to spool you, to add max drag you would have to put the reel in freespool to make this adjustment.