Ceramic boca bearing upgrade. - Kayak Fishing Adventures on Big Water’s Edge

T Bone · 02-22-2015, 09:05 AM

Like many of you have had to over the years,I am faced again with bearing replacement in one of my avets.This time around its my JX 6/3.I am considering doing it myself this time and going with Boca bearings,an ABEC 7 Ceramic bearing.Just curious if anyone else has taken the plunge.The bearing kit is $57.95 and in comparison sending it to AVET for repair costs $44 which includes whatever bearings are needed.
Just inquiring if anyone has used them and what do you think.I think we can all agree that our gear will be getting a workout this year.

JeffB · 02-22-2015, 09:20 AM

I've put the Orange sealed ceramics in a lot of my bass reels. I love them. I dunno if there is a huge difference between the SS, but they are nice. Nice thing is the ceramic guts won't rust, but the frame still can. I received a slightly better free spool with them allowing me to cast a little further.

T Bone · 02-22-2015, 11:46 AM

Did you do the full kit or just the spool bearings? I think the most benefit would probably be on the spool bearings.

bus kid · 02-22-2015, 11:53 AM

Quote:

Originally Posted by JeffB

I've put the Orange sealed ceramics in a lot of my bass reels. I love them. I dunno if there is a huge difference between the SS, but they are nice. Nice thing is the ceramic guts won't rust, but the frame still can. I received a slightly better free spool with them allowing me to cast a little further.

Huge difference. I went with the ceramic spool bearings on my revo inshore and buddy has the SS his . We both have 200 yards 30# braid and the same rod, mine outcasts his by quite a bit and its not the user as we have swapped set ups.

JeffB · 02-22-2015, 10:45 PM

I did a full kit on all reels

skrilla · 02-23-2015, 11:25 AM

Ceramics really shine in smaller reels IMHO. I get bass guys wanting them so they can huck those 3/8oz or lighter lures farther. Do keep an eye on those bearings especially in the salt.

Try cleaning and relubing your JX bearings first. You might be surprised. I'm not to fond of the factory grease job on Avet's bearings but after a simple clean and relube job the life and performance on those bearings greatly improve. On trashed Avets that come across my workbench I send em to Avet and when they come back I go through the bearings myself.

T Bone · 02-24-2015, 06:17 PM

My JX was rough and is now completely locked.

I know it sounds crazy.it was rough.fished it on a trip,then rougher,now it seems locked up completely.I am good about rinsing them with fresh water when I get home but I may start doing while breaking down.

I am so slammed with work,I think I am just going to send it to AVET,but appreciate the input for sure.I have narrow accurate 870 that is really my heavier casting reel and the JX is now just the meat winch.

ful-rac · 02-24-2015, 06:24 PM

Quote:

Originally Posted by T Bone

My JX was rough and is now completely locked.

I know it sounds crazy.it was rough.fished it on a trip,then rougher,now it seems locked up completely.I am good about rinsing them with fresh water when I get home but I may start doing while breaking down.

I am so slammed with work,I think I am just going to send it to AVET,but appreciate the input for sure.I have narrow accurate 870 that is really my heavier casting reel and the JX is now just the meat winch.

Sounds like a bad pinion bearing....common avet condition....

02-22-2015, 09:05 AM	#1
T Bone Senior Member Join Date: Dec 2008 Location: Redlands CA Posts: 871	Ceramic boca bearing upgrade. Like many of you have had to over the years,I am faced again with bearing replacement in one of my avets.This time around its my JX 6/3.I am considering doing it myself this time and going with Boca bearings,an ABEC 7 Ceramic bearing.Just curious if anyone else has taken the plunge.The bearing kit is $57.95 and in comparison sending it to AVET for repair costs $44 which includes whatever bearings are needed. Just inquiring if anyone has used them and what do you think.I think we can all agree that our gear will be getting a workout this year. __________________ Barachit Baralah,Elohim-In the beginning,God-Genesis 1:1 "Who among you,if your son asked for a fish would give them a serpent " Jesus Matt. 7:10

02-22-2015, 09:20 AM	#2
JeffB Senior Member Join Date: Oct 2011 Location: La Jolla Posts: 1,216	I've put the Orange sealed ceramics in a lot of my bass reels. I love them. I dunno if there is a huge difference between the SS, but they are nice. Nice thing is the ceramic guts won't rust, but the frame still can. I received a slightly better free spool with them allowing me to cast a little further. __________________ If you're looking for me I'm Last edited by JeffB; 02-22-2015 at 10:52 AM.

02-22-2015, 11:46 AM	#3
T Bone Senior Member Join Date: Dec 2008 Location: Redlands CA Posts: 871	Did you do the full kit or just the spool bearings? I think the most benefit would probably be on the spool bearings. __________________ Barachit Baralah,Elohim-In the beginning,God-Genesis 1:1 "Who among you,if your son asked for a fish would give them a serpent " Jesus Matt. 7:10

02-22-2015, 10:45 PM	#5
JeffB Senior Member Join Date: Oct 2011 Location: La Jolla Posts: 1,216	I did a full kit on all reels __________________ If you're looking for me I'm

02-23-2015, 11:25 AM	#6
skrilla Senior Member Join Date: Jun 2011 Location: San Diego Posts: 664	Ceramics really shine in smaller reels IMHO. I get bass guys wanting them so they can huck those 3/8oz or lighter lures farther. Do keep an eye on those bearings especially in the salt. Try cleaning and relubing your JX bearings first. You might be surprised. I'm not to fond of the factory grease job on Avet's bearings but after a simple clean and relube job the life and performance on those bearings greatly improve. On trashed Avets that come across my workbench I send em to Avet and when they come back I go through the bearings myself. __________________ Urban Camo Trident 13

02-24-2015, 06:17 PM	#7
T Bone Senior Member Join Date: Dec 2008 Location: Redlands CA Posts: 871	My JX was rough and is now completely locked. I know it sounds crazy.it was rough.fished it on a trip,then rougher,now it seems locked up completely.I am good about rinsing them with fresh water when I get home but I may start doing while breaking down. I am so slammed with work,I think I am just going to send it to AVET,but appreciate the input for sure.I have narrow accurate 870 that is really my heavier casting reel and the JX is now just the meat winch. __________________ Barachit Baralah,Elohim-In the beginning,God-Genesis 1:1 "Who among you,if your son asked for a fish would give them a serpent " Jesus Matt. 7:10