Help with HDS-5 PA 12 install - Kayak Fishing Adventures on Big Water’s Edge

Iceman · 05-27-2014, 08:40 AM

I have been adding an extra thru hull wire fitting for my installs on the new models and the HDS.

guamboas · 05-27-2014, 09:49 AM

thats what ill need hobie only has 2 openings on the thru hull rubber bushings ill have to swing on by and pick up an extra, thanks everyone thanks Andy

jorluivil · 05-27-2014, 10:35 AM

Quote:

Originally Posted by guamboas

thats what ill need hobie only has 2 openings on the thru hull rubber bushings ill have to swing on by and pick up an extra, thanks everyone thanks Andy

do you have a HDS or the Elite 7?

You should not need the extra thru-hull fittings if you have the HDS unit

MissileTM · 05-27-2014, 03:41 PM

Use a 1" spade bit and drill a second hole and use another Hobie grommet for the second wire. You should have one connector coming from the xducer and another from the battery. All 3 wires will not fit any of the hobie grommets.

guamboas · 05-27-2014, 10:54 PM

Thanks for the help, I picked up another Hull Trough today and that worked fine, I appreciate the help

05-27-2014, 08:40 AM	#1
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	I have been adding an extra thru hull wire fitting for my installs on the new models and the HDS. __________________ Last edited by Iceman; 05-27-2014 at 08:49 AM.

05-27-2014, 09:49 AM	#2
guamboas Member Join Date: Oct 2012 Posts: 47	thats what ill need hobie only has 2 openings on the thru hull rubber bushings ill have to swing on by and pick up an extra, thanks everyone thanks Andy __________________ PA 12 Dune NAVY CHIEF PETTY OFFICER (RET)

05-27-2014, 10:54 PM	#5
guamboas Member Join Date: Oct 2012 Posts: 47	Thanks for the help, I picked up another Hull Trough today and that worked fine, I appreciate the help __________________ PA 12 Dune NAVY CHIEF PETTY OFFICER (RET)

05-27-2014, 03:41 PM	#4
MissileTM Member Join Date: Aug 2013 Posts: 90	Use a 1" spade bit and drill a second hole and use another Hobie grommet for the second wire. You should have one connector coming from the xducer and another from the battery. All 3 wires will not fit any of the hobie grommets.