Fish Finder depth reading just blinks

[bosshoss]

Hello all, as the title says my depth reading just blinks 60 ft on my Elite 4 Dsi fish finder. Other than this issue seems like ff works fine.

I looked on the internet and found a couple of possibilities but have ruled them out already as the culprits.

Running a Elite 4 DSI ff with a thru hull transducer set up.

Anyone have any ideas ?

Thanks....

[Jimmyz123]

Originally Posted by bosshoss

Hello all, as the title says my depth reading just blinks 60 ft on my Elite 4 Dsi fish finder. Other than this issue seems like ff works fine.

I looked on the internet and found a couple of possibilities but have ruled them out already as the culprits.

Running a Elite 4 DSI ff with a thru hull transducer set up.

Anyone have any ideas ?

Thanks....

Do you have your depth settings set to 60', when it flashes like that it usually means it's deeper than what you are set for. I've also seen where if transducers go bad they will do that also. My guess is that you're depth default settings may be not set right. I usually set mine to auto.

Oh, I just googled your issue and someone said they had a bent pin, check your pins in the connectors.