La Jolla Monday

[Raskal311]

I picked up a use tank for my PA as well and had to replace it with a tube I got from HD. Make sure pickup is peeping out it the hole by about an inch.

[Iceman]

another thing that will make priming difficult is any obstruction, you can pull off the cartridge to expose the impeller by squeezing the 2 red tabs and twisting. A lot of times eel grass finds its way in there and wraps around.

Originally Posted by Iceman

another thing that will make priming difficult is any obstruction, you can pull off the cartridge to expose the impeller by squeezing the 2 red tabs and twisting. A lot of times eel grass finds its way in there and wraps around.

http://www.homedepot.com/p/t/1003900...2#.UT9MgXxxsVk

Met bigbarrels on the sand one day and he hooked me up with a 3ft/3ft section of this stuff. A little cut about 3"x3" section with some thin strips of duct tape and I haven't had any problems with clogging up my pump anymore.

[Lipripper92592]

Thank you for all the advice, I'll run a longer tube, and use some screen to keep it from getting plugged. Also I'll pop the cartridge and check for grass or obstructions.