Finished my kage.

[f'nsabiki]

I'll buy you an HDS5 Gen 2 if you dress-up like an Eskimo and take your kage down to the Children's pool and chase seals with it

[CorvinaLoca]

What do anticipate needing it for in this area?

[MrM]

Originally Posted by f'nsabiki

I'll buy you an HDS5 Gen 2 if you dress-up like an Eskimo and take your kage down to the Children's pool and chase seals with it

[MrPatrick]

Just made one too. Mine is made from a golf club shaft and a 24" long 3/8" piece of threaded rod. Warped the rod with electrical tape and used a nut to cinch it down in the club shaft. Also used some rubber screw in chair feet as a way to cushion the end of the cut golf shaft. Has a good feel in the hand. Maybe ten inches of thread exposed. Just need to put a chisel point in it.

[taggermike]

If I loose it I'm only out 9 bucks and then I get to make kage 2.0. After seeing the vids from the island it looks like the threads hold the fish fairly but still allow the shaft to be removed out the entrance hole. Also it looks like head is the kage target and the bones hold the shaft.

I agree with you Josh. A kage might be over kill for our local fsh. And I can see the guys that get spastic with a gaff doing the same thing with a spear. Thats a disturbing image. I've been fishing and spear fishing for a long time so I hope I'm not "that guy". I'm not maried to the kage idea; it looked worth trying and Joey at squdco was out of small gaff hooks. Mike

[THE DARKHORSE]

Originally Posted by taggermike

If I loose it I'm only out 9 bucks and then I get to make kage 2.0. After seeing the vids from the island it looks like the threads hold the fish fairly but still allow the shaft to be removed out the entrance hole. Also it looks like head is the kage target and the bones hold the shaft.

I agree with you Josh. A kage might be over kill for our local fsh. And I can see the guys that get spastic with a gaff doing the same thing with a spear. Thats a disturbing image. I've been fishing and spear fishing for a long time so I hope I'm not "that guy". I'm not maried to the kage idea; it looked worth trying and Joey at squdco was out of small gaff hooks. Mike

.
.
.

I never even considered the monetary perspective. I suppose it does qualify as a less expensive alternative, Mike. It's the disturbing image that doesn't take much imagination to conjure up. On a broad scale it could quickly get, I don't know, ugly? The fact of the matter is if the kage catches on locally (more often than not) it's going to be in the wrong hands! That's just a fact.

Don't get me wrong, I harvest my share of fish. So I'm really trying not to be the kettle calling the pot black. From a perspective of someone who teaches guys how to gaff fish (with proper placement and control), I'm sure you get my drift.

I'm sure you'll be quick and clean with your spearfishing experience, Mike. Here's wishing you dead on accuracy and lots of stoned fish.

My only advice would be to always make sure you have a gaff along as well. While a Kage can be a great tool, doesn't mean it's always the right tool for the job (barely hooked fish, pissed off 400 lb Sea Lion, etc., come to mind). The gaff in my opinion should always follow up the cage to secure any game when it comes time to harvest.

[Bigmarv]

Hey follow Anglers, This is the easiest and safest way to make an Hawaiian Kage. Buy a gaff with a 316 grade stainless steel hook. Make sure that the hook has a 5/16 diameter or greater. Borrow a mallet, (steel/copper) pipe, and a piece of 2 by 4 from a buddy. Well, you know the rest. Good Luck FYI, You must only use 316 grade stainless steel (For health reasons)

[ful-rac]

Wow this whole kage thing is really catching on....