Bait tank prime question

[fknricter]

my last pump needed to be primed,, what a pain in the butt.... i tried a gas line bulb primer and it ended up not working well if at all, ended up using a long piece of silicone tubing from a pet shop that i would siphon water and curl it in the bottom of my bucket tank when water was flowing.. used it for years and FINALLY got one you just throw over the side and turn the switch on.. highly recommend getting a self priming one.

[kiyo21]

How do the ones on the stealth models prime them selves? I got the same one, the tsunami 500 running off a 12v

[Siebler]

On the Stealths the pump is mounted below the waterline. No need to prime.

[kiyo21]

Originally Posted by Siebler

On the Stealths the pump is mounted below the waterline. No need to prime.

I dont quite understand theres is through the cut out in the hual and mine is through the scupper hole below the waterline but does that mean the while pump needs to be submerged? If that then i need a over the side pump

[Iceman]

the impeller needs to be below the waterline or you could add a pick up tube like Hobie uses. A little forward momentum is all you need to force water up to impeller. Once primed it should stay primed.