![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
|
white plastic insert causes leaking - mystery solved...
If you look at the video you will see the front hatch has a white plastic tub with a lip on it. That causes serious leaking because it breaks the seal between the lid and the rubber seal on the kayak. Trim the lip off of the white plastic insert and try the test again...or you can test the theory yourself by putting a long piece of plastic between your car door and the rubber seal and running it through the car wash and then complain that BMW doesn't make a good car cause it leaks on the carpet when I take it through the car wash,,,,
|
![]() |
![]() |
![]() |
#2 | |
Senior Member
Join Date: Mar 2012
Location: San Bernardino, CA
Posts: 913
|
Quote:
Hobie should make it to where it has a better latch if they wanted to keep the tub the way it is or make the tub better so it will be sealed a lot better! it will be just like my t-tops on my camaro they need to make it more water tight and the water gutter line on the t-tops longer so it runs it away from the t-top slats or have no gutter line so it runs with the contour of the car. Kind of the same lines lie with the hobie PA
__________________
Remember There are Many Fish in the Sea MEANS MORE TO EAT!!! |
|
![]() |
![]() |
![]() |
#3 |
Senior Member
|
offer you can't refuse?
that is cool... my PA came with the plastic tub so I thought it was after market. and yes would be upset if I paid for it and it didn't say if you buy it your front hatch will start leaking...anyway if any PA owner wants to stop by Bay Park (above mission bay) you can use my Ryobi to trim your tub lip off to make the seal better - pm me it will only takes 10 minutes...
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Aug 2010
Posts: 311
|
Are their any other kayaks that don't take on water when taking on waves? I have three and they all take on water. I don't own a P.A..
|
![]() |
![]() |
![]() |
#5 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
Looked like the Gulf, wind was what he was referring to. Loved the Forrest Gump ending
![]() Treat your PA like a lil skiff. waves over the bow of any skiff will have you bailing.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Mar 2012
Location: Santee
Posts: 384
|
I have a tarpon 160 and I get wet in the surf but stays dry inside and my wife has a malibu mini x which also stays dry.
|
![]() |
![]() |
![]() |
#7 |
#1 on fishstick's hitlist
Join Date: May 2011
Location: Sea level
Posts: 1,478
|
My X factor is older and i put weather seal around the gator hatch (one strip on the yak and one on the hatch). I dont get any water in there anymore. granted i only launch through small waves and one or two might break over the bow, but even then its bone dry, i have to pour water in to get the transducer wet ( i have a ghetto "wet mount" with a pocket under the silicone for water to fill. works just as well).
__________________
MLPA- My Largest Poaching Area ![]() |
![]() |
![]() |
![]() |
|
|