Replacing treble hooks? - Kayak Fishing Adventures on Big Water’s Edge

eertkao · 02-27-2012, 11:32 PM

I have a Tady C and a Tady 45 that have rusty hooks and needed help on what size hooks and rings I need to get?

For hooks, I'm planning on getting Owner Power point 4x but I have yet to decide on which brand rings to get. Any help would be greatly appreciated

eertkao · 02-27-2012, 11:32 PM

Also, would a soldering iron be enough for the job or would I need a torch? Thanks!

jorluivil · 02-27-2012, 11:53 PM

Send buskid a PM......I think he just got a whole bunch done.

Deefeesha · 02-28-2012, 05:29 AM

pm'd you

bus kid · 02-28-2012, 10:44 AM

Quote:

Originally Posted by jorluivil

Send buskid a PM......I think he just got a whole bunch done.

Follow wades advice and you will be all right.

http://www.bigwatersedge.com/bwevb/s...hlight=brazing

And no a soldering iron won't work. If you need help PM me

grey zone · 02-28-2012, 05:38 PM

You can get replacement trebles with a cut in the eye, I think mustad makes them. Match the size to whats on the lure. Their strength is great, you will straighten the hook before the eye opens.

bus kid · 03-01-2012, 02:42 PM

Here is where I got the rod 6 feet for $13.00

http://www.mcmaster.com/#standard-ty...l-rods/=gh4xcq

PescadorPete · 03-02-2012, 04:55 AM

Seaforth Landing tackle shop sells these in small quantities. I use 6L the most.

http://www.roscoinc.com/butt_rings.html

For hooks I use Owner Stinger trebles, ST-66TN, usually 1/0 or 2/0 depending on the jig size.

bus kid · 03-09-2012, 04:24 PM

3 feet of the 6 foot rod.
2012-03-09_14-37-50_775.jpg
coiled around a .350 dia rod
2012-03-09_14-38-39_511.jpg
brazed per wades instructions.
2012-03-09_14-52-04_128.jpg
oh yeah i forgot to mention all 30 jigs i bought are iron man #3 not bad for about $50.00 total

02-27-2012, 11:32 PM	#1
eertkao Steve-O. Join Date: Nov 2011 Location: North OC Posts: 120	Replacing treble hooks? I have a Tady C and a Tady 45 that have rusty hooks and needed help on what size hooks and rings I need to get? For hooks, I'm planning on getting Owner Power point 4x but I have yet to decide on which brand rings to get. Any help would be greatly appreciated __________________

02-27-2012, 11:32 PM	#2
eertkao Steve-O. Join Date: Nov 2011 Location: North OC Posts: 120	Also, would a soldering iron be enough for the job or would I need a torch? Thanks! __________________

03-01-2012, 02:42 PM	#7
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	Here is where I got the rod 6 feet for $13.00 http://www.mcmaster.com/#standard-ty...l-rods/=gh4xcq __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

03-09-2012, 04:24 PM	#9
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	3 feet of the 6 foot rod. 2012-03-09_14-37-50_775.jpg coiled around a .350 dia rod 2012-03-09_14-38-39_511.jpg brazed per wades instructions. 2012-03-09_14-52-04_128.jpg oh yeah i forgot to mention all 30 jigs i bought are iron man #3 not bad for about $50.00 total __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

02-27-2012, 11:53 PM	#3
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,856	Send buskid a PM......I think he just got a whole bunch done. __________________ www.facebook.com/Teamsewer

02-28-2012, 05:29 AM	#4
Deefeesha Senior Member Join Date: May 2011 Location: I.E. Posts: 179	pm'd you

02-28-2012, 05:38 PM	#6
grey zone Senior Member Join Date: Mar 2005 Location: san diego Posts: 158	You can get replacement trebles with a cut in the eye, I think mustad makes them. Match the size to whats on the lure. Their strength is great, you will straighten the hook before the eye opens.

03-02-2012, 04:55 AM	#8
PescadorPete Senior Member Join Date: Mar 2005 Location: Leucadia, CA Posts: 261	Seaforth Landing tackle shop sells these in small quantities. I use 6L the most. http://www.roscoinc.com/butt_rings.html For hooks I use Owner Stinger trebles, ST-66TN, usually 1/0 or 2/0 depending on the jig size.