Stuipd question, please help.......

[min-va]

My Cobra Explorer had a little crack on the back, water did get in after Monday morning in Newport.

So i got some repair material from Cobra, going to use solder iron and fill the crack, but after i was reading the instruction from Cobra, its saying.

"IF YOU ARE REPAIRING A CRACK, YOU WILL FIRST NEED TO “V” THE OPENING OF THE CRACK TO GAIN ACCESS TO THE INSIDE OF THE CRACK."

I really not sure what is "V" the opening of the crack means........do i first use iron to open the crack and fill it back with the material?

[mtnbykr2]

To "v" is to cut down into the crack at an angle on both sides of the crack as to make a V, yes you are making a larger (but not much) area as to allow the bond to penatrate, check with someone in the know though,
I have plastic welded cracks around handles and such, I guess it depends on the location of the crack and how large of an area I know Cobras are pretty thin in some spots...

[roadx]

hopefully this will help

from Paw Paw on Vimeo.

[bus kid]

go see Andy at OEX Sunset Beach.

[jorluivil]

Originally Posted by bus kid

go see Andy at OEX Sunset Beach.

YEAH!!!

And while you're there pick up a new Hobie Outback or PA -if available-

[bus kid]

Originally Posted by jorluivil

YEAH!!!

And while you're there pick up a new Hobie Outback or PA -if available-

Fred Hall is coming... or waiting for the Iceman to Post up that PA for $1200, or $1210 if he washes it.

[min-va]

Originally Posted by jorluivil

YEAH!!!

And while you're there pick up a new Hobie Outback or PA -if available-

I would love to if i can talk my wife into