Bait tank prime question - Kayak Fishing Adventures on Big Water’s Edge

fknricter · 01-20-2013, 06:39 PM

my last pump needed to be primed,, what a pain in the butt.... i tried a gas line bulb primer and it ended up not working well if at all, ended up using a long piece of silicone tubing from a pet shop that i would siphon water and curl it in the bottom of my bucket tank when water was flowing.. used it for years and FINALLY got one you just throw over the side and turn the switch on.. highly recommend getting a self priming one.

01-20-2013, 06:39 PM	#5
fknricter Senior Member Join Date: Jan 2010 Location: redlands, ca Posts: 118	my last pump needed to be primed,, what a pain in the butt.... i tried a gas line bulb primer and it ended up not working well if at all, ended up using a long piece of silicone tubing from a pet shop that i would siphon water and curl it in the bottom of my bucket tank when water was flowing.. used it for years and FINALLY got one you just throw over the side and turn the switch on.. highly recommend getting a self priming one. __________________