Share Your Innovations - Page 40 - Kayak Fishing Adventures on Big Water’s Edge

FISH11 · 09-19-2019, 03:42 PM

Great write up and installation, Bob. Looks great and should be awesome when the Yellows hook up, and you get to see them on the new FF screen. Thanks for sharing, it should help guys with their installation plans.

NikitaMolot · 10-10-2019, 06:07 PM

thank you

2013outback · 06-10-2020, 07:23 PM

Needed a cutting board and saw someone post on this thread a similiar idea, hope you don’t mind my take on it🤙🏽 Cheers. Have more mods coming up too will be posting soon as I start to learn to use this forum. I’m in Newport Beach and new to kayaking but if anyone is in the area shoot me a dm and let’s exchange numbers and meet up. Thanks guys, this forum is rad, glad stumbled upon it🤙🏽

SoCalEDC · 06-11-2020, 08:55 AM

Quote:

Originally Posted by whereubinh

Just recently upgraded my fish finder on my hobie and found out that the transducer did not fit into the hobie lowrance ready hull. I tried a couple of diy on youtube to add an extension to the provided adapter and tried to attach it to the existing lowrance ready cover but it cause the tranducer end to stick out of the back of the cover. When the cover was tighten down, it crushed the end of the transducer and I didn't think it was a good idea to keep it liek that. I Came up with a pretty solid solution to mount the transducer so that it fits completely in the transducer slot using my 3d modeling skills and a 3d printer. I put in a giant open to provide maximum water flow and to prevent sand from being trapped inside the cover. I was getting tired of having to flush all the sand out after every use as the sand builds up greatly and falls all over my car roof when transferring. If anyone needs something similar for their garmin transducer, lmk. I can help out. This diy could've came out really bad if I didn't have access to a CAD software or a 3d printer.

very cool solution.

Quote:

Originally Posted by 2013outback

Needed a cutting board and saw someone post on this thread a similiar idea, hope you don’t mind my take on it🤙🏽 Cheers. Have more mods coming up too will be posting soon as I start to learn to use this forum. I’m in Newport Beach and new to kayaking but if anyone is in the area shoot me a dm and let’s exchange numbers and meet up. Thanks guys, this forum is rad, glad stumbled upon it🤙🏽

cool, does that render your hatch unusable?

2013outback · 06-11-2020, 12:38 PM

Quote:

Originally Posted by SoCalEDC

very cool solution.

cool, does that render your hatch unusable?

The cutting board is strapped onto the lid of the hatch with shock cord. Knot on each end and therefore making the cutting board stay perfectly in place and also makes the hatch handle easily accessible . Just lift the cutting board with same hand and lift turn and open the hatch.

Tried to upload a picture and video but it’s not workIng

JohnMckroidJr · 10-31-2020, 11:33 AM

Tuna Tubes

SoCalEDC · 11-09-2020, 12:31 PM

Quote:

Originally Posted by JohnMckroidJr

Tuna Tubes

Cool, what are you fishing for out there that require baits that size? Big grouper?

JohnMckroidJr · 11-11-2020, 10:43 PM

Quote:

Originally Posted by SoCalEDC

Cool, what are you fishing for out there that require baits that size? Big grouper?

The baits are generally no bigger than 1 to 3lbs, but the Small Tunas are a favorite food of many species. It's kind of like using live squid in SoCal in that everything wants to eat them. The challenge is keeping them alive and presenting them to the right species without catching a less desirable Barracuda or worse yet, Shark. So far I have taken Wahoo, Sailfish, King Mackerel and Black Grouper on them. Lately, Barracuda is all I have been able to get with the tunas, but I did have something good hanging for 45 minutes on 40lb test before I got greedy tweeked the drag just a little too tight, breaking the wire leader

Earlier this year a World record 97.8lb King Mackerel was taken on a Little Tunny in the same waters that are frequently fished by kayaks. Wouldn't it be sick if the next world record King Mackerel was taken off a kayak?

SoCalEDC · 11-18-2020, 08:07 AM

Quote:

Originally Posted by JohnMckroidJr

The baits are generally no bigger than 1 to 3lbs, but the Small Tunas are a favorite food of many species. It's kind of like using live squid in SoCal in that everything wants to eat them. The challenge is keeping them alive and presenting them to the right species without catching a less desirable Barracuda or worse yet, Shark. So far I have taken Wahoo, Sailfish, King Mackerel and Black Grouper on them. Lately, Barracuda is all I have been able to get with the tunas, but I did have something good hanging for 45 minutes on 40lb test before I got greedy tweeked the drag just a little too tight, breaking the wire leader

Earlier this year a World record 97.8lb King Mackerel was taken on a Little Tunny in the same waters that are frequently fished by kayaks. Wouldn't it be sick if the next world record King Mackerel was taken off a kayak?

Wow thats cool. I am so jealous of the south florida fishery

whereubinh · 12-14-2020, 03:26 PM

Thought i share this project of mine I've been working on for a bit over a month. This is my design of a Hobie style livewell. It has a self priming tube that will prime the pump when given some speed. I was able to water test it and it worked better than expected.

JohnMckroidJr · 12-15-2020, 11:43 AM

Quote:

Originally Posted by whereubinh

Thought i share this project of mine I've been working on for a bit over a month. This is my design of a Hobie style livewell. It has a self priming tube that will prime the pump when given some speed. I was able to water test it and it worked better than expected.

Interesting, what material did you use to make the livewell?

socal.beach.bum · 12-15-2020, 11:50 AM

Quote:

Originally Posted by JohnMckroidJr

Interesting, what material did you use to make the livewell?

Looks like he 3D printed it.

whereubinh · 12-15-2020, 12:27 PM

Quote:

Originally Posted by JohnMckroidJr

Interesting, what material did you use to make the livewell?

Hey man,
I used carbon fiber additive PLA plastic.

JohnMckroidJr · 12-17-2020, 09:17 AM

Quote:

Originally Posted by whereubinh

Hey man,
I used carbon fiber additive PLA plastic.

Very cool. It looks like it was made in sections that you fused together. I would like to learn more about that type of fabrication. Was it done with a 3d printer, if so what type?

whereubinh · 12-17-2020, 06:38 PM

Quote:

Originally Posted by JohnMckroidJr

Very cool. It looks like it was made in sections that you fused together. I would like to learn more about that type of fabrication. Was it done with a 3d printer, if so what type?

Yes this was made in sections. The 3d printer i used was an ender 3 pro with a couple of upgrades for better quality prints. The sections were bonded using jb weld steel reinforce epoxy.

JohnMckroidJr · 12-18-2020, 10:04 AM

Quote:

Originally Posted by whereubinh

Yes this was made in sections. The 3d printer i used was an ender 3 pro with a couple of upgrades for better quality prints. The sections were bonded using jb weld steel reinforce epoxy.

Well done! Appreciate the info, and quick reply. Does the printer come with the software needed to make the design, if not what do you consider a good program for a beginner who wants to fab parts for his kayak? Thanks.

whereubinh · 12-19-2020, 12:02 AM

Quote:

Originally Posted by JohnMckroidJr

Well done! Appreciate the info, and quick reply. Does the printer come with the software needed to make the design, if not what do you consider a good program for a beginner who wants to fab parts for his kayak? Thanks.

The printer does not come with any software. I personally use Solidworks to design and model my parts. This can take some time to learn as ita more of an engineering tool. I know alot of people that do you fusion 360 to cad for 3d printing as it is free and more user friendly. You should check that out.

JohnMckroidJr · 12-20-2020, 08:12 AM

Quote:

Originally Posted by whereubinh

The printer does not come with any software. I personally use Solidworks to design and model my parts. This can take some time to learn as ita more of an engineering tool. I know alot of people that do you fusion 360 to cad for 3d printing as it is free and more user friendly. You should check that out.

Good to know, I am checking out Fusion 360 -- Thanks.

socal.beach.bum · 12-20-2020, 02:08 PM

Quote:

Originally Posted by whereubinh

The printer does not come with any software. I personally use Solidworks to design and model my parts. This can take some time to learn as ita more of an engineering tool. I know alot of people that do you fusion 360 to cad for 3d printing as it is free and more user friendly. You should check that out.

Solid works? Wow how did you swing a license? I pay almost $100k per seat for my engineers.

tomahawk · 12-20-2020, 10:27 PM

Solidworks and ProE both used to be available in student versions to students. My son used the ProE version when he was in school. I think you meant $10K per seat (I did a web search and that is what I saw), still not for the casual user. I also read something that said Solidworks gives a free version to start ups.

09-19-2019, 03:42 PM	#781
FISH11 Member Join Date: Aug 2013 Location: Pine Valley when not fishing La Jolla Posts: 2,642	Great write up and installation, Bob. Looks great and should be awesome when the Yellows hook up, and you get to see them on the new FF screen. Thanks for sharing, it should help guys with their installation plans. __________________ MARK ......... 2016 MALIBU X FACTOR, 2020 SOLO SKIFF (Fishing Kayak on Steroids )

10-10-2019, 06:07 PM	#782
NikitaMolot Banned Join Date: Oct 2019 Location: Italy, Roma Posts: 10	thank you

12-20-2020, 10:27 PM	#800
tomahawk Senior Member Join Date: Aug 2012 Posts: 109	Solidworks and ProE both used to be available in student versions to students. My son used the ProE version when he was in school. I think you meant $10K per seat (I did a web search and that is what I saw), still not for the casual user. I also read something that said Solidworks gives a free version to start ups.