|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
|
Thread Tools | Display Modes |
06-07-2010, 12:26 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Under a bridge
Posts: 2,169
|
Need an 08 Mirage Drive
|
06-07-2010, 12:46 PM | #2 |
Senior Member
Join Date: Aug 2009
Location: Carlsbad
Posts: 591
|
If I'm not mistaken the drives are interchangeable. The only difference is the locking mechanism on the hull.
|
06-07-2010, 12:55 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: Under a bridge
Posts: 2,169
|
So ANY drive will work, the only difference is the lock? Does the locking mechanism come with the drive assembly? Thanks for any info on this. Matt
|
06-07-2010, 01:04 PM | #4 |
Senior Member
Join Date: Aug 2009
Location: Carlsbad
Posts: 591
|
The locking mechanism comes with/attached to the kayak.
|
06-07-2010, 01:43 PM | #5 |
Senior Member
Join Date: Nov 2008
Location: La Mesa
Posts: 386
|
Any drive will work, but the new ones designed for the click and go system will not work with the old twist cams unless modified. Change out the metal pin that goes through the mirage drive, (the pin that rests in the molded grooves of the kayak). Its a very simple fix, just buy the pin you need from Fastlane and used a rubber mallet to push out the old pin, insert the new one, and pound it through with the hammer until it sticks out evenly on either side of the drive.
__________________
Need a custom rod wrapped? PM me! http://s686.photobucket.com/albums/vv222/fishinkid2010/Sample%20Rod%20Wrapping/?albumview=slideshow |
06-07-2010, 01:45 PM | #6 |
Senior Member
Join Date: Aug 2009
Location: Carlsbad
Posts: 591
|
I stand corrected.
|
06-07-2010, 01:51 PM | #7 |
Olivenhain Bob
Join Date: May 2008
Location: Olivenhain, CA
Posts: 1,121
|
Keep an eye on Craig's list. Every once in a while one shows up. These are probably ones recovered by divers in LJ who have run across drives lost overboard. I am sure you can also order a new one from a Hobie dealer.
Bob |
06-07-2010, 03:05 PM | #8 |
Senior Member
Join Date: Jun 2010
Location: Under a bridge
Posts: 2,169
|
Thanks guys, there are a few Hobies for as little as 650 - 750 bucks out there, without a drive. Wanted to see what the "package" would set me back. I think that I may just go with the "old" arm powered kayak.
|
06-07-2010, 03:59 PM | #9 |
Senior Member
Join Date: Feb 2010
Location: Clairemont
Posts: 813
|
|
06-07-2010, 04:12 PM | #10 |
.
Join Date: May 2010
Posts: 1,155
|
theres a revo on craigslist for $1150 , also a one for $750 with no drive and if you go back couple days 2 drives were available, looked like older ones for $270 each, so for 1100 you could get a good yak reasonably . look through graigslist!!!!
http://sandiego.craigslist.org/csd/boa/1780352771.html http://sandiego.craigslist.org/esd/spo/1776716533.html http://sandiego.craigslist.org/nsd/spo/1770330724.html http://sandiego.craigslist.org/esd/spo/1776716533.html good luck |
06-07-2010, 04:17 PM | #11 |
Senior Member
Join Date: Jun 2009
Posts: 118
|
Thanks for the links but beware. That first one is no Revolution. It's the Hobie Classic and it's not for fishing. Not sure but I think they are worth far less than $1150
|
06-07-2010, 04:19 PM | #12 |
.
Join Date: May 2010
Posts: 1,155
|
bender there was two revo classics sunday for $600 each with drives, they got snapped up quick
|
06-07-2010, 05:00 PM | #13 |
Senior Member
Join Date: Apr 2005
Location: La Jolla
Posts: 130
|
No such thing as a Revo Classic......Only the old Hobie Mirage which is now the Mirage Classic. You dont want it......Get the Revolution
|
06-07-2010, 05:09 PM | #14 | |
.
Join Date: May 2010
Posts: 1,155
|
Quote:
sorry you are correct! hobie mirage classic |
|
06-07-2010, 05:19 PM | #15 |
Senior Member
Join Date: Apr 2005
Location: La Jolla
Posts: 130
|
If you can find a Revolution cheap without the drive get it. It paddles pretty well without the drive and you should be able to find a drive cheap later....
Or from what I hear you can get a swim mask and find them all over the sea floor off La Jolla Shores |
06-07-2010, 06:07 PM | #16 |
Senior Member
Join Date: Jun 2010
Location: Under a bridge
Posts: 2,169
|
Possible o8 revo plus about 250 for a drive. 850 - 900 total, sounds like a good deal , right? Anything I need to look for as far as the condition of the boat or drives? I read about the possible cracking in the area of the drive receiver, will look for that. Any other help from all you experienced guys would be appreciated. Thanks, Matt
|
06-07-2010, 06:28 PM | #17 |
Senior Member
Join Date: Mar 2006
Location: La Jolla Shores
Posts: 1,626
|
2008 prone to crack at cams...buyer beware.
|
06-07-2010, 06:39 PM | #18 |
Senior Member
Join Date: Apr 2005
Location: La Jolla
Posts: 130
|
Check next to the cam lock knobs. Ive seen tiny cracks in pre 08's twice.....
Also check with Nate or Drew at OEX Oceanside......They've seen it all in regards to Hobies..... If you can get a Revo with drive,seat, paddle in good condition for 8-900 thats a steal...... |
06-07-2010, 09:15 PM | #19 | |
Senior Member
Join Date: Oct 2009
Location: Wildomar, CA.
Posts: 294
|
Quote:
|
|
06-07-2010, 09:24 PM | #20 |
Senior Member
Join Date: Sep 2006
Location: Bay Ho
Posts: 1,382
|
On any Hobie Adventure or Outback made up to the year 2006 you must check the Drive Well area for any cracks.
Read my post with Pics of where to look, and which serial #'s were affected. http://www.bigwatersedge.com/bwevb/s...ight=Adventure |
Tags |
fins, hobie, mirage drive, revolution |
|
|