Mirage Drive GT Upgrade - Page 2 - Kayak Fishing Adventures on Big Water’s Edge

Oxbeast1210 · 02-04-2015, 07:50 PM

Just finished my Drive Thank you for the instructions made it easy!

Thank you for the parts and fast shipping Iceman

Maxfli123 · 11-01-2015, 02:28 PM

Anyone have issues with it the upgraded drive making a clicking sound? It happens when the peddles are fully extended...on the way back down it clicks and I can't see anything hitting or catching.

Iceman · 11-01-2015, 06:42 PM

See if the pedal arm is rubbing on the idler pulley or possibly the play in the sizing holes in the drum.

Maxfli123 · 11-02-2015, 01:44 PM

Thanks for the reply iceman. I checked and double checked. Finally I got my flashlight and after checking all the spots I thought it could be, I was stumped as I could not find the culprit. I kept looking to find the the cause was the new gt bearings themselves. The sprocket has some long plastic rod bearings that pop instead of roll. If I fully extend the drive the bearings seems to get caught up on something and they skip, pop, click whatever you want to call it. I thought this to be odd so I switched the fins to see if the problem persisted, and it did. I'm taking the sprocket back today I hope they don't give me a hard time with the exchange as it looks perfect, and rolls perfect off the drive shaft just as soon as you put it on under pressure it buckles...I hope this is just a fluke.

11-01-2015, 06:42 PM	#23
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,943	See if the pedal arm is rubbing on the idler pulley or possibly the play in the sizing holes in the drum. __________________

11-01-2015, 02:28 PM	#22
Maxfli123 Senior Member Join Date: Mar 2013 Posts: 116	Anyone have issues with it the upgraded drive making a clicking sound? It happens when the peddles are fully extended...on the way back down it clicks and I can't see anything hitting or catching.

11-02-2015, 01:44 PM	#24
Maxfli123 Senior Member Join Date: Mar 2013 Posts: 116	Thanks for the reply iceman. I checked and double checked. Finally I got my flashlight and after checking all the spots I thought it could be, I was stumped as I could not find the culprit. I kept looking to find the the cause was the new gt bearings themselves. The sprocket has some long plastic rod bearings that pop instead of roll. If I fully extend the drive the bearings seems to get caught up on something and they skip, pop, click whatever you want to call it. I thought this to be odd so I switched the fins to see if the problem persisted, and it did. I'm taking the sprocket back today I hope they don't give me a hard time with the exchange as it looks perfect, and rolls perfect off the drive shaft just as soon as you put it on under pressure it buckles...I hope this is just a fluke.