|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
04-19-2018, 08:38 PM | #1 |
Junior
Join Date: Oct 2014
Location: Anaheim
Posts: 28
|
Hobie outback Mirage Drive
Has anyone had this issue before? Now it seems that i have to press down a little harder on the right side before locking the drive in place, does a little plastic need to be shaved off? does it need to be worn in? I'm confused because this is a brand new 2017 hull that was pulled out of packaging. |
04-19-2018, 10:18 PM | #2 |
Emperor
Join Date: May 2009
Location: Buena Park
Posts: 3,649
|
Definitely go see andy. He should be able to give you an answer. Likely not a big deal, especially on a new boat.
__________________
There's nothing colder than yesterday's hotdog. |
04-20-2018, 04:57 AM | #3 |
Brandon
Join Date: Jul 2011
Location: San Diego
Posts: 2,345
|
Make sure you’re putting it in as straight as possible. It can take some time to break in as well. Happened to me on two different hobies when they were new, but fixed itself.
|
04-20-2018, 07:23 AM | #4 |
Senior Member
Join Date: May 2007
Location: Palos Verdes
Posts: 1,857
|
Dealer
Go see the Hobie Dealer that you bought your kayak from...he is the best prepared to offer warranty service if you need it.
This is the reason that Hobie recommends buying from a dealer in your area. Don't cut any plastic until you've seen your local dealer.
__________________
Jim / Saba Slayer |
04-20-2018, 07:56 AM | #5 |
Senior Member
Join Date: Sep 2017
Location: Los Angeles, CA
Posts: 401
|
Fwiw, mines pretty new and I find I have to finagle it a bit to get them to click in.
|
04-20-2018, 08:31 AM | #6 |
Senior Member
Join Date: Apr 2013
Location: Los Angeles
Posts: 1,897
|
I am no expert here, but here is my experience to share:
The first time I got on an Outback in Baja, I had a hell of time getting the drive to seat properly. It was me. In time, I got to do it easier. I would pull the black caps away from me thinking it would widen the opening. Actually they were supposed to be toward me. It may not be the case, but make sure the drive is facing the correct direction. You should be able to read the numbers on the uprights of pedals. |
04-20-2018, 10:45 AM | #7 |
Senior Member
Join Date: Mar 2011
Location: Santa Ana/Westminster
Posts: 1,256
|
It sounds like the spring is broken, replacing it is easy Andy ordered me a new one about a year ago. 10-15min to switch out.
__________________
Kevin Yellow PA12 |
04-20-2018, 10:46 AM | #8 |
Senior Member
Join Date: Mar 2011
Location: Santa Ana/Westminster
Posts: 1,256
|
__________________
Kevin Yellow PA12 |
04-20-2018, 10:55 AM | #9 |
Senior Member
Join Date: Jan 2012
Posts: 2,526
|
Sold an outback recently and had same issue
[QUOTE=Raskal311;292418]It sounds like the spring is broken, replacing it is easy Andy ordered me a new one about a year ago. 10-15min to switch
Wasn’t aware of the problem until the guy that purchased it from me made me aware . Same problem. Spring broken. First time I’ve experienced this from any of my hobie’s |
04-20-2018, 01:51 PM | #10 | |
Senior Member
Join Date: Mar 2011
Location: Santa Ana/Westminster
Posts: 1,256
|
[QUOTE=TJones;292421]
Quote:
Keep in mind the swing is side specific so order the right one or maybe a couple of both for future use.
__________________
Kevin Yellow PA12 |
|
04-21-2018, 02:10 PM | #11 |
Junior
Join Date: Oct 2014
Location: Anaheim
Posts: 28
|
Fixed
Hey guys thanks for all the input! I'm glad to be part of this community because i often reach out to you guys who have had much more experience than me when working with these Hobie kayaks.
Anyways, it turns out the rivet was too tight on the right click and go, the Hobie dealership is going to fix it for me when i take it down to SD next week. He told me to use a flat head screw driver and that sometimes you can loosen it up, but i told him i'd rather him do it since i don't trust myself. So those of you that said you had the same issue and it resolved itself more than likely worked it in overtime and it loosened up, i too thought i was putting in the mirage drive wrong at first but after a lot of research and practice i realized it was a failure in one of the click and go mechanism. Thanks for all the advice guys, you helped me troubleshoot the problem. |
Thread Tools | |
Display Modes | |
|
|