Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 03-10-2008, 10:09 AM   #1
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
Malibu X 13 more photos

I have one of the prototypes at the Sunset Beach location, come on by and test paddle it in the harbor. I will be taking it out in the surf very soon, hope to have some video and pix.



Don't write off the rod storage. I easily got 4 inside. The first was an 8.5 Inshore the last my 9 foot jig stick. You just slide em in guides up, turn over and slide the next. This screw hatch is not likely the only alternative.



Production on these is supposed to be full swing in 2 weeks. The hull is ready, but hardware and rigging is all being worked out. We sold 4 at the show and are taking orders at Sunset and Pt Loma.



__________________

Last edited by Iceman; 03-10-2008 at 10:29 AM.
Iceman is offline   Reply With Quote
Old 03-10-2008, 11:24 AM   #2
aguachico
Senior Member
 
aguachico's Avatar
 
Join Date: Mar 2005
Posts: 719
Congats on the new hull and design. I like the bow shape.
aguachico is offline   Reply With Quote
Old 03-10-2008, 11:43 AM   #3
bluesquids
Senior Member
 
Join Date: Mar 2005
Location: Jamul, CA
Posts: 243
Oh, I didn't know the front hatch is like that. Makes for a dry inside if you submarine the nose. Can it still be cut out and open like other models? Is there a X-15 in the works?
__________________
Thanks,
bluesquids
bluesquids is offline   Reply With Quote
Old 03-10-2008, 12:07 PM   #4
wavster
Senior Member
 
wavster's Avatar
 
Join Date: Feb 2007
Location: Encinitas
Posts: 562
Looks like they lost the channels (a good thing). How does the new "tri-keel"
design sound? My last extreme (with channels) gurgled quite a bit...
wavster is offline   Reply With Quote
Old 03-10-2008, 12:26 PM   #5
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
Quote:
Looks like they lost the channels (a good thing)
Look again Dave, the channels are there, they help make the boat more rigid as well as track. This yak tracked very nicely forward and backwards (I like back trolling for halibut......takes me back to my walleye fishing days)

Rear view.......turn your monitor on it's side......I am too busy

__________________
Iceman is offline   Reply With Quote
Old 03-10-2008, 12:59 PM   #6
wavster
Senior Member
 
wavster's Avatar
 
Join Date: Feb 2007
Location: Encinitas
Posts: 562
Thanks. I see them now. They look a little different than last year's extreme.

I'll check it out at Fred Hall SD.
wavster is offline   Reply With Quote
Old 03-10-2008, 01:00 PM   #7
cabojohn
PROBATION
 
Join Date: Jul 2005
Posts: 656
Q. How do you mount the motor on the X13?













lol
cabojohn is offline   Reply With Quote
Old 03-10-2008, 01:24 PM   #8
Zed
BANNED
 
Zed's Avatar
 
Join Date: Mar 2005
Location: W of 5
Posts: 1,265
I like the rod storage. No excuses about trying it out now. Standard stubborn ass excuse, not withstanding.

Just an idea, but you could plug the drain, add a bubbler, and Clay's got a jacuzz. The new pimp fishin style.
Zed is offline   Reply With Quote
Old 03-10-2008, 03:31 PM   #9
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
Punk kid was talking alot of smack about how fast her ride was.......we ran for pinks






no competition, so I tried to even it up SUP style.......77 degrees.....feels like Summer!

__________________
Iceman is offline   Reply With Quote
Old 03-10-2008, 04:20 PM   #10
nmbrinkman
Work Sucks!
 
nmbrinkman's Avatar
 
Join Date: Mar 2006
Location: San Diego
Posts: 559
I'll trade my fish n'dive for one.... C'mon, straight across. Ok, ok, I'll let you throw in a kayatank and a carbon fiber paddle if you feel too bad about stealing my kayak from me.


I really do like that kayak though.
nmbrinkman is offline   Reply With Quote
Old 03-10-2008, 06:00 PM   #11
Brian Sanner
Member
 
Brian Sanner's Avatar
 
Join Date: Feb 2007
Posts: 48
Saw it at the show, the one thing that really stood out to me was the large rectangular dive well behind the seat, alot of options there tank and storage wise. The overall length is nice. Looks like it could be a fast boat. Nice talking to you at the show as well Andy.
Brian Sanner is offline   Reply With Quote
Old 03-10-2008, 07:44 PM   #12
Dan
Senior Member
 
Dan's Avatar
 
Join Date: Mar 2006
Posts: 1,053
Let me know if it passes the "jeans on" bird rock test. lol
Dan is offline   Reply With Quote
Old 03-11-2008, 07:15 AM   #13
Matt
Support your local pangas
 
Join Date: Feb 2007
Location: Lj
Posts: 976
oooooooohhhh weeeeee

Damn that thing looks good!! Here's hoping they follow thru on the threats and make that slightly longer one with the extra back hatch!!! Then I will buy one fo' sho'!!!
Matt is offline   Reply With Quote
Old 03-13-2008, 11:02 PM   #14
EdCal
Junior
 
Join Date: Mar 2008
Location: Tustin, CA
Posts: 6
color options?

Hey Andy
are the X13 color options the same as earlier Malibus or are there new colors or custom requests? btw i liken your camo one

Ed
EdCal is offline   Reply With Quote
Old 03-14-2008, 09:05 AM   #15
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
Same Malibu Kayaks color options...........I want one in sand.
__________________
Iceman is offline   Reply With Quote
Old 03-14-2008, 10:49 AM   #16
Jim Sammons LJKF
Senior Member
 
Join Date: Mar 2005
Location: San Diego CA
Posts: 947
Obviously the rods were put in there on dry land standing next to the kayak. How difficult is it on the water, and how tough is it to get to the hatch to flip it back ?
Have they come up with a better hinge or attachment for the hatch?
The boat does look good, but seems to have a few things to work out, as all new kayaks do.
__________________
Jim Sammons
La Jolla Kayak Fishing
The Kayak Fishing Show
JimSammons.com
Jim Sammons LJKF is offline   Reply With Quote
Old 03-14-2008, 11:27 AM   #17
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
Quote:
Obviously the rods were put in there on dry land standing next to the kayak. How difficult is it on the water, and how tough is it to get to the hatch to flip it back ?
Have they come up with a better hinge or attachment for the hatch?
The boat does look good, but seems to have a few things to work out, as all new kayaks do.
This is not the production model, prototype just to get the design out. The hinge will be recessed and the hatch will be removable. There will also be a spring arm to hold it open. The drain hole will be a threaded plug. There will be a gasket and several options for the hold. Cut out with no bulkhead like on the X and Extreme, cut out with a edging on it to eliminate sharp edges and a couple deck plate type hatch options.
__________________
Iceman is offline   Reply With Quote
Old 03-14-2008, 11:34 AM   #18
Jim Sammons LJKF
Senior Member
 
Join Date: Mar 2005
Location: San Diego CA
Posts: 947
I look forward to seeing the finished product.
Ready by Del Mar????
__________________
Jim Sammons
La Jolla Kayak Fishing
The Kayak Fishing Show
JimSammons.com
Jim Sammons LJKF is offline   Reply With Quote
Old 03-14-2008, 08:40 PM   #19
PerryC
Junior Member
 
Join Date: Jan 2007
Location: Orange County
Posts: 13
Kayak

Andy,
It is a very sweet looking ride. Too bad someone doesn't make a small rectangular hatch with a single T-Handle on it, or a couple of latches like a pelican box has. That could possibly be another option for a small hatch in the tankwell or confined area. When I'm over bassin' I'll stop in for a peek. TC&TL,
Perry
__________________
Visit us online at All KayakFishing.
PerryC is offline   Reply With Quote
Old 03-17-2008, 01:15 AM   #20
lambadmin
Spam Sanitation Dept
 
lambadmin's Avatar
 
Join Date: Jan 2007
Posts: 1,375
Quote:
Originally Posted by Iceman View Post

Rear view.......turn your monitor on it's side......I am too busy

lol

Look Masta - I DID IT!!!!

You can actually do that, edit the image after you uploaded it in your gallery... and flip it clock wise or CCW...

The logo on the side is freaky though...
lambadmin is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 09:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.