Installing HDS 5 into Hobie Outback - Kayak Fishing Adventures on Big Water’s Edge

nickc5 · 03-03-2015, 02:00 PM

Picked up the HDS 5. Any ideas on how to mount it on the Lowrance ready outback? I've messed around with it a bit, but I'm trying figuring out the most secure way possible. Going to Home Depot later today. Any ideas would be appreciated !

Sent from my iPhone using Tapatalk

nickc5 · 03-03-2015, 02:13 PM

Mount the transducer that is.

Sent from my iPhone using Tapatalk

Bert Vega · 03-03-2015, 02:24 PM

It should fit in the lowrance ready deal. Located on the bottom of the kayak.

ashmoz · 03-29-2015, 01:51 AM

Nick - did your transducer for hds-5 fit in the Lowerance Ready slot?

cell128 · 03-29-2015, 02:20 AM

Ram mount also the best way to mount the unit easy on and off. Secure hold.

ctfphoto · 03-29-2015, 04:43 AM

Mine had to be modified to fit the Lowance Ready Mount.

ashmoz · 03-29-2015, 08:29 AM

Thanks.. I'm hearing/seeing different responses on the web.

nickc5 · 03-29-2015, 09:03 AM

I modified it using several washers, nuts, bolts and what not to make it secure. Thanks guys

Sent from my iPhone using Tapatalk

nickc5 · 03-29-2015, 09:04 AM

I used the scotty universal fish finder mount. Being able to take it on and off is a piece of cake

Sent from my iPhone using Tapatalk

03-03-2015, 02:00 PM	#1
nickc5 Senior Member Join Date: Oct 2014 Location: Placentia Posts: 186	Installing HDS 5 into Hobie Outback Picked up the HDS 5. Any ideas on how to mount it on the Lowrance ready outback? I've messed around with it a bit, but I'm trying figuring out the most secure way possible. Going to Home Depot later today. Any ideas would be appreciated ! Sent from my iPhone using Tapatalk

03-03-2015, 02:24 PM	#3
Bert Vega Tail Chaser! Join Date: Dec 2013 Location: Murrieta Posts: 627	It should fit in the lowrance ready deal. Located on the bottom of the kayak. __________________ I hate seals!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-03-2015, 02:13 PM	#2
nickc5 Senior Member Join Date: Oct 2014 Location: Placentia Posts: 186	Mount the transducer that is. Sent from my iPhone using Tapatalk

03-29-2015, 01:51 AM	#4
ashmoz 192.168.0.1 Join Date: Apr 2011 Posts: 397	Nick - did your transducer for hds-5 fit in the Lowerance Ready slot?

03-29-2015, 02:20 AM	#5
cell128 lizard king Join Date: Mar 2014 Location: Lakewood Posts: 520	Ram mount also the best way to mount the unit easy on and off. Secure hold.

03-29-2015, 04:43 AM	#6
ctfphoto Senior Member Join Date: Sep 2011 Location: San Diego Posts: 901	Mine had to be modified to fit the Lowance Ready Mount.

03-29-2015, 08:29 AM	#7
ashmoz 192.168.0.1 Join Date: Apr 2011 Posts: 397	Thanks.. I'm hearing/seeing different responses on the web.

03-29-2015, 09:03 AM	#8
nickc5 Senior Member Join Date: Oct 2014 Location: Placentia Posts: 186	I modified it using several washers, nuts, bolts and what not to make it secure. Thanks guys Sent from my iPhone using Tapatalk

03-29-2015, 09:04 AM	#9
nickc5 Senior Member Join Date: Oct 2014 Location: Placentia Posts: 186	I used the scotty universal fish finder mount. Being able to take it on and off is a piece of cake Sent from my iPhone using Tapatalk