Poor mans Hobie livewell - Kayak Fishing Adventures on Big Water’s Edge

cell128 · 11-21-2014, 11:32 AM

So I'm trying to make a wanna be Hobie style well with my other bait bucket parts and this Costco food container. Anyone make one like this? Tips? I don't think the pump would drag on the sand too much or I'd have to be real carful on launch and landings.for some reason pics aren't uploading. Or anyone have a cheap scupper style Hobie tank laying around? uploadfromtaptalk1416598293518.jpg uploadfromtaptalk1416598351119.jpg

Sent from my SM-G900V using Tapatalk

octico · 11-21-2014, 12:11 PM

Look at this, you want to put the pump on the bottom.

http://www.kayaksportfishing.com/sho..._baittanks.htm

chxh8me · 11-21-2014, 12:16 PM

A lot of people use those vittle vaults. I think there might be some "how to" threads in this forum somewhere. Just put the pump on a long enough piece of hose to dangle it over the side. It works just fine, and you can pull it in when launching/landing and paddling thru kelp. Or is there a reason you want to go thru a scupper? You dont need to with that type of pump. Plus, its nice to have a fully self contained unit that can be removed when you dont need it.

Or check the online store of this forum. They sell one like this.

cell128 · 11-21-2014, 12:41 PM

I can live with dangling the pump over the side but I really want the water to drain from Inside the tank thorugh the scupper. My current t bucket drains the water through a slit and it builds up all over the storage area makes the yak drag more.. I could just make one hole for drainage in the tank. It will be a cleaner look too.

Sent from my SM-G900V using Tapatalk

chxh8me · 11-21-2014, 01:02 PM

Quote:

Originally Posted by cell128

I can live with dangling the pump over the side but I really want the water to drain from Inside the tank thorugh the scupper. My current t bucket drains the water through a slit and it builds up all over the storage area makes the yak drag more.. I could just make one hole for drainage in the tank. It will be a cleaner look too.

Sent from my SM-G900V using Tapatalk

I put a coleman cooler drain in the bottom corner of my tank. You can always put one of those in, as close to a scupper hole as possible.

octico · 11-21-2014, 01:57 PM

Put hose at the maximum water lever and let it drain out the side.

igotpron · 11-21-2014, 02:16 PM

Let it hang over the side. I've played with most setups. The rule 350 on the left side with the strainer facing forward is the way to go. That way when you under way the pump gets pulled back and up and mostly out of the water but keeps intake in the water. Hardly any drag since the pump is barely skimming the surface.

chxh8me · 11-21-2014, 02:43 PM

Quote:

Originally Posted by octico

Put hose at the maximum water lever and let it drain out the side.

oops, yah. what he said. I misread what you were referring to in terms of drainage. my cooler drain is an "end of the day" drain.

taggermike · 11-21-2014, 03:48 PM

Not sure what yak you have or the size of it's tank well, but if the well is big enough you can run the pump out side the bait tank and still pump through the scupper. I did that with the fish and dive I had years ago and really like it. Mike

cell128 · 11-21-2014, 08:14 PM

I tinkered around and it worked out good. Can still drain to scupper hole and even use the other hole to pump through if I don't want to hang it over the side. Overall it came out good thanks guys. This should work much better and those greens won't jump out of the bucket anymore lol is this what u mean taggermike? uploadfromtaptalk1416629551786.jpg uploadfromtaptalk1416629648480.jpg uploadfromtaptalk1416629658457.jpg

Sent from my SM-G900V using Tapatalk

Cadillyak · 11-21-2014, 11:05 PM

Looks good. Does it work as planned??

cell128 · 11-21-2014, 11:25 PM

Quote:

Originally Posted by Cadillyak

Looks good. Does it work as planned??

Battery was dead charging overnight but should work good .. Hopefully I get to try it this sunday.... Need to get some pad eyes to get it strapped down better

Sent from my SM-G900V using Tapatalk

11-21-2014, 11:32 AM	#1
cell128 lizard king Join Date: Mar 2014 Location: Lakewood Posts: 520	Poor mans Hobie livewell So I'm trying to make a wanna be Hobie style well with my other bait bucket parts and this Costco food container. Anyone make one like this? Tips? I don't think the pump would drag on the sand too much or I'd have to be real carful on launch and landings.for some reason pics aren't uploading. Or anyone have a cheap scupper style Hobie tank laying around? uploadfromtaptalk1416598293518.jpg uploadfromtaptalk1416598351119.jpg Sent from my SM-G900V using Tapatalk

11-21-2014, 11:05 PM	#11
Cadillyak Team Get $$ Join Date: Feb 2013 Location: San Diego, CA Posts: 841	Looks good. Does it work as planned?? __________________ The "Y" is silent 2012 Olive PA 12 2011 Papaya Outback

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-21-2014, 12:11 PM	#2
octico Senior Member Join Date: Mar 2014 Location: The city of Orange Posts: 1,278	Look at this, you want to put the pump on the bottom. http://www.kayaksportfishing.com/sho..._baittanks.htm

11-21-2014, 12:16 PM	#3
chxh8me Senior Member Join Date: Jul 2013 Location: Thousand Oaks Posts: 182	A lot of people use those vittle vaults. I think there might be some "how to" threads in this forum somewhere. Just put the pump on a long enough piece of hose to dangle it over the side. It works just fine, and you can pull it in when launching/landing and paddling thru kelp. Or is there a reason you want to go thru a scupper? You dont need to with that type of pump. Plus, its nice to have a fully self contained unit that can be removed when you dont need it. Or check the online store of this forum. They sell one like this.

11-21-2014, 12:41 PM	#4
cell128 lizard king Join Date: Mar 2014 Location: Lakewood Posts: 520	I can live with dangling the pump over the side but I really want the water to drain from Inside the tank thorugh the scupper. My current t bucket drains the water through a slit and it builds up all over the storage area makes the yak drag more.. I could just make one hole for drainage in the tank. It will be a cleaner look too. Sent from my SM-G900V using Tapatalk

11-21-2014, 01:57 PM	#6
octico Senior Member Join Date: Mar 2014 Location: The city of Orange Posts: 1,278	Put hose at the maximum water lever and let it drain out the side.

11-21-2014, 02:16 PM	#7
igotpron Xcoastie Join Date: Jun 2013 Location: Westminster Posts: 285	Let it hang over the side. I've played with most setups. The rule 350 on the left side with the strainer facing forward is the way to go. That way when you under way the pump gets pulled back and up and mostly out of the water but keeps intake in the water. Hardly any drag since the pump is barely skimming the surface.

11-21-2014, 03:48 PM	#9
taggermike Senior Member Join Date: May 2007 Location: Chula Vista Posts: 1,589	Not sure what yak you have or the size of it's tank well, but if the well is big enough you can run the pump out side the bait tank and still pump through the scupper. I did that with the fish and dive I had years ago and really like it. Mike

11-21-2014, 08:14 PM	#10
cell128 lizard king Join Date: Mar 2014 Location: Lakewood Posts: 520	I tinkered around and it worked out good. Can still drain to scupper hole and even use the other hole to pump through if I don't want to hang it over the side. Overall it came out good thanks guys. This should work much better and those greens won't jump out of the bucket anymore lol is this what u mean taggermike? uploadfromtaptalk1416629551786.jpg uploadfromtaptalk1416629648480.jpg uploadfromtaptalk1416629658457.jpg Sent from my SM-G900V using Tapatalk