Lowrance scupper mount using toro sprinkler head? - Kayak Fishing Adventures on Big Water’s Edge

beef78 · 08-31-2013, 08:26 PM

Anyone have pictures of this? I am trying to figure out a way to mount my transducer on my kayak so it doesn't drag over the side. THANKS!

Dannowar · 09-01-2013, 02:12 AM

Try the innovations thread

Carp · 09-01-2013, 06:11 AM

Not a sprinkler head but cheaper.
1" npt PVC pipe cap going to the grey 1" sprinkler pipe.

About 3$ for everything
1" sprinkler pipe 9" long
1" PVC pipe cap

bus kid · 09-01-2013, 08:13 AM

I used the sprinkler head for about 9 months, sorry I didn't take pics. I did notice that the transducer would move a little every now and then, so I made a mount. Now its solid, in the water and gives good readings.
check out the pics here.

http://www.bigwatersedge.com/bwevb/a...hp?albumid=233

beef78 · 09-01-2013, 09:17 AM

Quote:

Originally Posted by bus kid

I used the sprinkler head for about 9 months, sorry I didn't take pics. I did notice that the transducer would move a little every now and then, so I made a mount. Now its solid, in the water and gives good readings.
check out the pics here.

http://www.bigwatersedge.com/bwevb/a...hp?albumid=233

Thank everyone! I think I've found one that will work. It will probably be a mix of bus kid's and one I saw on NCKA.org. I'll post it when I'm done.

08-31-2013, 08:26 PM	#1
beef78 Large Member Join Date: Apr 2013 Location: San Diego Posts: 316	Lowrance scupper mount using toro sprinkler head? Anyone have pictures of this? I am trying to figure out a way to mount my transducer on my kayak so it doesn't drag over the side. THANKS! __________________ "I shall not tiptoe through life to arrive safely at death."

09-01-2013, 02:12 AM	#2
Dannowar Senior Member Join Date: Aug 2012 Posts: 1,823	Try the innovations thread __________________ "Beware the lollipop of mediocrity; lick it once and you’ll suck forever." — Brian Wilson

09-01-2013, 06:11 AM	#3
Carp (⌐■_■)--︻╦╤─ - - - Join Date: Jun 2013 Location: Sandy Eggo Posts: 166	Not a sprinkler head but cheaper. 1" npt PVC pipe cap going to the grey 1" sprinkler pipe. About 3$ for everything 1" sprinkler pipe 9" long 1" PVC pipe cap __________________ "California.. If it's not illegal it's going to cost ya" -Bob Munden Last edited by Carp; 09-01-2013 at 07:03 AM.

09-01-2013, 08:13 AM	#4
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	I used the sprinkler head for about 9 months, sorry I didn't take pics. I did notice that the transducer would move a little every now and then, so I made a mount. Now its solid, in the water and gives good readings. check out the pics here. http://www.bigwatersedge.com/bwevb/a...hp?albumid=233 __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode