Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 07-28-2013, 06:37 PM   #1
echo1er
Senior Member
 
echo1er's Avatar
 
Join Date: Sep 2011
Posts: 598
Air Pump?!

I was thinking of adding a air pump to the live well. Do you think its to much bait fish isn't lasting half a day. Got a new pump battery.
echo1er is offline   Reply With Quote
Old 07-28-2013, 07:13 PM   #2
beef78
Large Member
 
beef78's Avatar
 
Join Date: Apr 2013
Location: San Diego
Posts: 316
Skip the air pump. They die because of the waste they produce. I started with just a little tank and they would always die quickly. If you take a bucket and use it to replace the water in the water often they will last a little longer. That helped me out. The best option to keep your bait alive is to spring for one of the tanks that oex makes. I made one myself and wished I would have just bought one. It was a lot of trouble. If you do decide to make one yourself, amazon has a good deal on a tsunami pump kit that comes with all of the plumbing you'll need. The rest of the stuff you can get at OEX.
__________________
"I shall not tiptoe through life to arrive safely at death."
beef78 is offline   Reply With Quote
Old 07-29-2013, 09:36 AM   #3
taggermike
Senior Member
 
taggermike's Avatar
 
Join Date: May 2007
Location: Chula Vista
Posts: 1,589
An air pump will keep minnows, smelt, or shrimp alive but the bait fish we use here need a steady flow of water to live more than a few minutes. Skip the air pump and set up a flow through water pump system. Round tanks work better then corners and wide low tanks tend to work better than taller narrower tanks. Avoid over crowding and your bait should live all day. Mike
taggermike is offline   Reply With Quote
Old 07-29-2013, 10:11 AM   #4
steveooo
Senior Member
 
steveooo's Avatar
 
Join Date: Sep 2005
Posts: 1,921
Quote:
Originally Posted by taggermike View Post
Avoid over crowding and your bait should live all day. Mike
^ This. Plus the other good stuff he mentioned, but IMO, over crowding is the most common cause of the bait dying on a yak.

Our tanks are relatively small, and will always be overcrowded once you get more than a few pieces of bait in there. If you are fishing in the harbor, near the receiver, see if you can slip the guy a few extra bucks and work out a deal where you can take a few baits at a time, and come back for a refill.

The less things the bait can bump into in the tank (plumbing fittings, hoses, corners, screw heads, airstones), the better.
steveooo is offline   Reply With Quote
Old 07-29-2013, 01:56 PM   #5
alanw
Made in U.S.A.
 
alanw's Avatar
 
Join Date: Oct 2012
Location: Dana Point
Posts: 1,625
Avoiding overcrowding is a huge factor in how long they live.

Having a round tank and minimal obstructions helps alot.

Slowing down the water supply so they aren't dying of exhaustion from swimming hard all day is another big factor.
__________________
Hobie PA 14 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Jackson Kraken ¸.·´¯`·.¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Malibu X-Factor ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Malibu Stealth-12 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>


Its not a spelling B its a fishing B ~yakjoe
alanw is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.