HDS-5 Update - Kayak Fishing Adventures on Big Water’s Edge

Handymansd · 07-15-2011, 08:20 AM

I remember a discussion on the boards a while back about the Nautical Insight map "disappearing" in the LaJolla area on the HDS-5 and 7 units. I never heard any follow-up on that, so I have spent some time talking to Lowrance about it. Upgrading to the 4.0 software has no effect on the problem. They are still unsure of an answer and have admitted that it is definitely a problem with all of the units, as their "master" map has the same issue.... a large blank rectangle that extends from basically the LaJolla point all the way up just past Solana Beach, and East to the beach. They seem to think it is a problem with the area being surveyed, although other manufacturers have the information available on their units, so that does not make sense.

I will try to update you all when I know more... one of their engineers is supposed to call me back with some answers, I am holding my breath...

Tight lines...

xpresso2am · 07-15-2011, 09:00 AM

Thanks, for the update, I'm about to pick up one for myself..i'll just hang on.

wade · 07-15-2011, 10:04 AM

The original 4.0 update SUCKED!!!!!

im not your Guinea-pig Lowrance...dont release Betas.......

i went back to 3.5............

Holy Mackerel · 07-15-2011, 10:53 AM

Good to know, only 3.5 for me!

kobra · 07-15-2011, 06:32 PM

Quote:

Originally Posted by wade

The original 4.0 update SUCKED!!!!!

im not your Guinea-pig Lowrance...dont release Betas.......

i went back to 3.5............

Hey Wade, is the 4.0 update really that bad? I just updated mine and haven't used it yet. I updated from 2.6 or 2.4 or something like that. Is it dificult to go back to the original version?

buttchaser · 07-15-2011, 07:46 PM

Yup , The 4.0 has a bunch of issues , I hate when I power on , it reads 1.5 feet , i have to mess with the range to find the bottom ....

kobra · 07-15-2011, 08:49 PM

Thanks bc. Wonder why Lowrance would do something like that? Seems like it would be bad for business.

Iparker · 07-15-2011, 08:51 PM

Thanks for the update. I started the original thread and submitted the screen shots to a Lowrance customer service rep in hopes to get through to an engineer/tech. I followed up with the same customer service rep and he still hadn't heard back from the engineering department. At about the same time I also noted a post on BD for the same problem and that guy had gotten through to an engineer/tech, so I figured they at least knew about the problem. Considering they have the backside of San Clemente Island mapped with contour lines, there is no excuse for not being able to provide that service for our local waters. If you think it would help, PM me the engineering contact and I'd be happy to contact them as well. The squeaky wheel gets the grease.

wade · 07-15-2011, 10:51 PM

Quote:

Originally Posted by kobra

Hey Wade, is the 4.0 update really that bad? I just updated mine and haven't used it yet. I updated from 2.6 or 2.4 or something like that. Is it dificult to go back to the original version?

Yes.

No, its easy. same as updating.
go to :
http://www.lowrance.com/Products/Mar...-System/HDS-3/

MuddyMike · 07-15-2011, 11:04 PM

I have the latest version installed, and the contour lines stop to the west of 117.18. Problem exists on 2 other HDS owners I know.

kobra · 07-16-2011, 12:18 AM

Quote:

Originally Posted by wade

Yes.

No, its easy. same as updating.
go to :
http://www.lowrance.com/Products/Mar...-System/HDS-3/

Thanks Wade.

07-15-2011, 08:20 AM	#1
Handymansd Ancient Member Join Date: Feb 2007 Location: On The Water Posts: 935	HDS-5 Update I remember a discussion on the boards a while back about the Nautical Insight map "disappearing" in the LaJolla area on the HDS-5 and 7 units. I never heard any follow-up on that, so I have spent some time talking to Lowrance about it. Upgrading to the 4.0 software has no effect on the problem. They are still unsure of an answer and have admitted that it is definitely a problem with all of the units, as their "master" map has the same issue.... a large blank rectangle that extends from basically the LaJolla point all the way up just past Solana Beach, and East to the beach. They seem to think it is a problem with the area being surveyed, although other manufacturers have the information available on their units, so that does not make sense. I will try to update you all when I know more... one of their engineers is supposed to call me back with some answers, I am holding my breath... Tight lines... __________________ All men are equal before fish. -Herbert Hoover

07-15-2011, 10:04 AM	#3
wade Senior Member Join Date: Jun 2009 Location: Oceanside Posts: 1,214	The original 4.0 update SUCKED!!!!! im not your Guinea-pig Lowrance...dont release Betas....... i went back to 3.5............ __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2011, 09:00 AM	#2
xpresso2am Senior Member Join Date: May 2010 Location: San Diego, CA Posts: 209	Thanks, for the update, I'm about to pick up one for myself..i'll just hang on.

07-15-2011, 10:53 AM	#4
Holy Mackerel Señor member Join Date: Mar 2005 Location: San Diego, CA Posts: 1,627	Good to know, only 3.5 for me!

07-15-2011, 07:46 PM	#6
buttchaser Float Tuber Join Date: Mar 2005 Posts: 243	Yup , The 4.0 has a bunch of issues , I hate when I power on , it reads 1.5 feet , i have to mess with the range to find the bottom ....

07-15-2011, 08:49 PM	#7
kobra Senior Member Join Date: May 2005 Location: oceanside Posts: 880	Thanks bc. Wonder why Lowrance would do something like that? Seems like it would be bad for business.

07-15-2011, 08:51 PM	#8
Iparker Junior Join Date: May 2009 Posts: 23	Thanks for the update. I started the original thread and submitted the screen shots to a Lowrance customer service rep in hopes to get through to an engineer/tech. I followed up with the same customer service rep and he still hadn't heard back from the engineering department. At about the same time I also noted a post on BD for the same problem and that guy had gotten through to an engineer/tech, so I figured they at least knew about the problem. Considering they have the backside of San Clemente Island mapped with contour lines, there is no excuse for not being able to provide that service for our local waters. If you think it would help, PM me the engineering contact and I'd be happy to contact them as well. The squeaky wheel gets the grease.

07-15-2011, 11:04 PM	#10
MuddyMike Senior Member Join Date: Feb 2011 Location: Temecula, CA Posts: 111	I have the latest version installed, and the contour lines stop to the west of 117.18. Problem exists on 2 other HDS owners I know.