Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 04-17-2016, 03:43 PM   #681
outlawangler
Member
 
outlawangler's Avatar
 
Join Date: May 2014
Location: Redondo Beach, CA
Posts: 45
Short video on rod tip protectors that I added to the Kraken 13.5.

https://www.youtube.com/watch?v=GNvhV-v8HOU
__________________
outlawangler is offline   Reply With Quote
Old 04-21-2016, 09:07 PM   #682
pingpangdang
Senior Member
 
Join Date: Dec 2010
Posts: 228
Floating livewell from pipe insulation, zip ties, 3 gallon bucket, and screw on top...All parts from home depot for no more than 20.

Kept macs live all day. Easy to put bait in and I drilled holes on top so it would get lighter when lifted on the kayak if I needed to boogie. Enough water inside to keep fish alive before posting up on the next stop. Then tossed it back in the water to float filling up all the way around the holes to give bait more swim space.

No seals ever messed with it. I've upgraded to a diy livewell using a bilge pump...

This would be better in the bay or lakes.

Just a cheap optionuploadfromtaptalk1461297931223.jpguploadfromtaptalk1461297967557.jpguploadfromtaptalk1461298002079.jpguploadfromtaptalk1461298045841.jpg

Sent from my SM-N900T using Tapatalk
pingpangdang is offline   Reply With Quote
Old 04-23-2016, 07:35 AM   #683
Orca Winfrey
Senior Member
 
Join Date: Sep 2015
Location: The I. E.
Posts: 353
Thanks! Thank really great. Might try it.
Orca Winfrey is offline   Reply With Quote
Old 04-30-2016, 08:00 PM   #684
Mr. NiceGuy
Manic for Life
 
Mr. NiceGuy's Avatar
 
Join Date: May 2015
Location: San Diego
Posts: 839
Quote:
Originally Posted by Str8shooter View Post
My Hobie PA14 garage lift . . . because its one heavy yak, and available storage space is always a premium.

https://youtu.be/pDucTjFJAMA

https://youtu.be/W_M0uwYlYOs
Very nice. Where did you buy your 2" side mount pulleys?
The Harbor Freight electric hoist looks like a good fit for your project.
__________________
Another ho-hum day in Paradise
Mr. NiceGuy is offline   Reply With Quote
Old 05-30-2016, 04:40 PM   #685
kayachapi
Member
 
Join Date: Dec 2011
Location: Tehachapi
Posts: 81
Magnetic transducer mount

1 1/2" PVC. Magnets from an instant screen.
Attached Images
File Type: jpg IMG_1206.jpg (67.8 KB, 776 views)
File Type: jpg IMG_1207.jpg (55.9 KB, 775 views)
kayachapi is offline   Reply With Quote
Old 05-30-2016, 07:25 PM   #686
jorluivil
Senior Member
 
jorluivil's Avatar
 
Join Date: Apr 2010
Posts: 6,856
Great start................however, I can't imagine all of the crap that will get hung up on that rod let alone the rust that it will build after a few trips. Why did you not use galvanized material?
__________________


www.facebook.com/Teamsewer
jorluivil is offline   Reply With Quote
Old 05-31-2016, 06:27 AM   #687
kayachapi
Member
 
Join Date: Dec 2011
Location: Tehachapi
Posts: 81
Crap!

I didn't think about the crap. The bolt and nuts are 2"x 1/4" stainless. I'm hoping it works. If something hangs up, it will just fall away and my signal will get funky. Then I will re-attach.
slow process shaping the PVC so I hope it works.
kayachapi is offline   Reply With Quote
Old 06-04-2016, 03:11 PM   #688
kayachapi
Member
 
Join Date: Dec 2011
Location: Tehachapi
Posts: 81
Everybody makes these

I know everybody has made these to death, but I'm pretty happy with them.
Attached Images
File Type: jpg IMG_1232.jpg (74.9 KB, 676 views)
File Type: jpg IMG_1233.jpg (78.9 KB, 669 views)
kayachapi is offline   Reply With Quote
Old 06-04-2016, 03:58 PM   #689
King Saba
Senior Member
 
King Saba's Avatar
 
Join Date: Nov 2014
Location: SGV
Posts: 848
Neat design. So you just slid the outer layer of the paracord onto the weed whacker line?
King Saba is offline   Reply With Quote
Old 06-04-2016, 05:04 PM   #690
kayachapi
Member
 
Join Date: Dec 2011
Location: Tehachapi
Posts: 81
Quote:
Originally Posted by King Saba View Post
Neat design. So you just slid the outer layer of the paracord onto the weed whacker line?
Yes, I use a strand of the inner core to tie the loop back, then electrical tape, then heat shrink.
kayachapi is offline   Reply With Quote
Old 06-04-2016, 05:14 PM   #691
YOYOYaker
Junior
 
Join Date: Nov 2015
Location: San Marcos, CA
Posts: 28
Here's a link to a video on how to do this.

http://yakchronicles.com/coiled-para...eash-tutorial/
YOYOYaker is offline   Reply With Quote
Old 06-12-2016, 05:20 PM   #692
fongman
Senior Member
 
Join Date: Mar 2005
Posts: 116
I haven't posted on here in a while, so I'll share a few things I made. The first is a fly rod holder. I have some extra RAM accessories so I made it for a RAM 1.5" ball mount. I originally used a bungee cord and lashing hook (OEX) to secure the rod to the rod holder. Recently I modified it to have a rotating collar, like the Scotty Power Lock.



The next are check valves. These will be used in place of the seat plugs in my Hobie Adventure. The parts list: 3/4" PVC male adapter, 3/4" PVC pipe, syringe plunger, and 1/8" SS rod. The video I saw used a 3/4" acrylic ball, but I couldn't find any for the right price. Instead, I found a 6-pack of syringes at Party City for $7. I cut the rod at the indentation, then filed the fins of the plunger so it would slide in the 3/4" PVC pipe. Do not push the pipe all the way into the adapter because you want to allow a gap for more water to pass through. The hole I drilled in the pipe allows the plunger about an 1/8" of clearance from the top. The threaded portion was sawed off above the last 3 threads.



fongman is offline   Reply With Quote
Old 06-12-2016, 06:55 PM   #693
fongman
Senior Member
 
Join Date: Mar 2005
Posts: 116
Seat Riser

The Adventure/Islander seat is below the water line, so the seat plugs must be in place. When water comes over the side, which is frequent, you end up sitting in a pool of water. I found a video on YouTube (AI Seat Riser) that addressed this problem. He used 2-part foam (8 lb) to build up the seat area about 1.5" - 2". Since the water line is now below the seat, he replaced the seat drain plugs with 3/4" PVC pipes. Watch the video if you are interested in making one.



In my build, I used the check valves in place of the 3/4" pipes (see my previous post). The keys to remember are: 1) be sure kayak is level, 2) use a release agent on the seat, 3) work fast with the foam since it will set up within 3 - 4 minutes, 4) concrete needs to be rough in order to quickly shape the foam, 5) before painting, use acetone to remove any chemical residue from the foam. A coat of Polyurethane over the paint will make it more durable. Since the seat covers the drain holes, I added channels to the seat riser so the water will be able to drain.



Due to the seat being higher, the mounting position for the back rest was also raised. I removed the bungee screw-in plugs used for the paddle keepers and replaced them with the D-ring plugs. The backrest is more comfortable clipped here. Plus it is easier to enter and exit the kayak with the shorter straps. The last modification was to secure the paddle bungee. It is now using a part of the Islander (sail) rigging.

I tested it out on a snotty day on the bay. As was expected, a lot of water came over the side, however, it drained out just as it was designed. The only negative was the hardness of the seat. I'll have to go back to sitting on my kneeling pad. Since I no longer need it under my seat (to raise me up), I'll now use it on top of the seat.
fongman is offline   Reply With Quote
Old 06-28-2016, 05:27 AM   #694
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,277
Send a message via AIM to MITCHELL
What does a 72in tent pole shrink wrap a pvc cap tread and one eye have in common

Bingo home made bait rod
Attached Images
File Type: jpg 20160628_050820.jpg (29.2 KB, 549 views)
File Type: jpg 20160628_050858.jpg (22.3 KB, 547 views)
File Type: jpg 20160628_051031.jpg (31.8 KB, 547 views)
__________________
Duke Mitchell
MITCHELL is offline   Reply With Quote
Old 07-25-2016, 09:33 AM   #695
Mr_Fixit
Senior Member
 
Mr_Fixit's Avatar
 
Join Date: Jun 2016
Location: Escondido, CA
Posts: 130
Leaders/Rigs

I find myself changing out a rig from time to time while out there. What to do with those rigs and leaders? You certainly dont want the tangling up or getting snagged on other things - like your leg, feet, pedals... So, I simply spool them up on these. Its a nice way to keep them all arranged, undamaged, easily re-usable, and readily available.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Mr_Fixit is offline   Reply With Quote
Old 07-27-2016, 01:50 PM   #696
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,526
This is my original battery connection

There aren't many like it , cause this one is mine . . It has seen many a battery . The first replacement I bought was similar in dimensions and capacity which was rated 7 amp 6 Vlt. I got that battery from fry's electronics for relatively cheap . Yes, 7 amp . That was a long time ago. Of course hobie has upgraded since then to a standard equipped 10 amp battery. Tbe current battery I am using is a Bioenno LIPO4 12 amp. This battery will last me all day and not slow on flow of pump,
Attached Images
File Type: jpg image.jpg (52.8 KB, 424 views)
TJones is offline   Reply With Quote
Old 07-27-2016, 04:31 PM   #697
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,526
Finishing up

What I've realized about these connections, is that they are bulletproof. Even with little care or attention, I have not had any problems. This connector is probably from an 09-10 outback, which was my first Hobie kayak. Yes, I started out on the Dark Side. Anyways, after having so many issues with my fishfinder, I decided to try this connector for my battery power source. I ordered a couple sets of connectors from a dealer and head them shipped. The complete package lists for about 20.00$. The package includes male/ female ends and pre-greased wire caps that even have a dust cap for the back of screw on wire connector . I have never seen this before. To prevent and issues, I also put some marine goop to insure a water tight seal at connection . This should give trouble free operation for more that a year of hard use. Ideally the life of your fish finder. Easily achievable if you do like me, and replace your unit every 6 months. .
TJones is offline   Reply With Quote
Old 07-27-2016, 04:38 PM   #698
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,526
Some pics

Battery in water tight container is for my hobie tank and is s 12 amp Lipo. This battery will run all day.
Attached Images
File Type: jpg image.jpg (43.8 KB, 398 views)
TJones is offline   Reply With Quote
Old 07-27-2016, 04:41 PM   #699
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,526
Guess rest of pics did not come through

Standard
Attached Images
File Type: jpg image.jpg (101.6 KB, 395 views)
TJones is offline   Reply With Quote
Old 07-27-2016, 04:42 PM   #700
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,526
Caps

If wires
Attached Images
File Type: jpg image.jpg (80.0 KB, 397 views)
TJones is offline   Reply With Quote
Reply

Tags
kayak fishing inovations, kayak rigging ideas

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 03:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.