Share Your Innovations

[SASQUATCH]

Originally Posted by Jimmyz123

http://www.youtube.com/watch?v=zeorK...ature=youtu.be

I had to make something to help make loading my Kayak on my car easier and to prevent messing up the wiper on the back window. Sure I could have paid $30 or more for an REI system or something already built, but where's the fun in that.
2 suction handles $5 each = $10
PVC pipe and fittings for both = $10
Pool Noodle, already owned.

Connected and tested best of all, it works.

where do you get those suction cup deals? looks like they fit the pvc perfect.

[Jimmyz123]

Originally Posted by SASQUATCH

where do you get those suction cup deals? looks like they fit the pvc perfect.

Harbor Freight, but you have to cut them in half, but for $5 a handle you can't beat that.

[SASQUATCH]

Originally Posted by Jimmyz123

Harbor Freight, but you have to cut them in half, but for $5 a handle you can't beat that.

great ingenuity, (sp?) thanks for the great write up

[gear junkie]

Used to store the kayak on the harbor freight stand but always found the kayak tipping to one side and it was rather difficult to load it on there. Found a free used memory foam mattress on craigslist. Cut it lengthwise down the middle and it works great. Cradles the kayak awesome with no hard spots.

[ful-rac]

Came across this idea from another dude on the hobie forum. Looked like a great way for re-entering your PA. All it is is rope attached to some kind of pipe, then that's attached to the back handle of the PA.

I tested this on Saturday and it worked great! Climbing on the PA from the rear seems to be the easiest way to get back on...at least for me it is. Is the ladder necessary to get back on...no...but it sure makes it a hell of a lot easier. I would imagine with waders full of water...anyway to make it easier could be a life saver.

In order for this to work, after you fall in the water...you have to swim over to the rear handle, give a sharp tug to the ladder, it will release from the bungee. You let the ladder hang down in the water, then you grab the PA back handle with both hands pull down and lift yourself up. As you are holding yourself up put one foot then the other on the ladder, lean forward, and your body weight should shift forward, and your back on. Then at that point you just climb back to the front seating position.

Stowed Position


Deployed Position

[Jimmyz123]

Originally Posted by ful-rac

Came across this idea from another dude on the hobie forum. Looked like a great way for re-entering your PA. All it is is rope attached to some kind of pipe, then that's attached to the back handle of the PA.

I tested this on Saturday and it worked great! Climbing on the PA from the rear seems to be the easiest way to get back on...at least for me it is. Is the ladder necessary to get back on...no...but it sure makes it a hell of a lot easier. I would imagine with waders full of water...anyway to make it easier could be a life saver.

In order for this to work, after you fall in the water...you have to swim over to the rear handle, give a sharp tug to the ladder, it will release from the bungee. You let the ladder hang down in the water, then you grab the PA back handle with both hands pull down and lift yourself up. As you are holding yourself up put one foot then the other on the ladder, lean forward, and your body weight should shift forward, and your back on. Then at that point you just climb back to the front seating position.

Stowed Position


Deployed Position

I don't have a PA but if I did, I sure would add this. Anything to make life easier and safer while Kayaking.

[easyday]

Made myself a fish beating stick. Ive been wanting one one for a while and after a few beers me and a buddy built this with left over stuff found around the house/ garage.

[Raskal311]

Originally Posted by easyday

Made myself a fish beating stick. Ive been wanting one one for a while and after a few beers me and a buddy built this with left over stuff found around the house/ garage.

Sure its not really for sea dogs?

[tomahawk]

be careful with the PVC. That looks like a health size and I have never hit anything with PVC that large. I have hit things with smaller (1 inch diameter) PVC and the issue is it shatters. Post up how it works after you beat down a fish or two.

[bus kid]

Originally Posted by Raskal311

Sure its not really for sea dogs?

if it is he forgot the nails!

[easyday]

It works great its filled with sand. I tested it out hitting alot of stuff, took a couple mackerel out in the driveway and beat em into mush and the side of my kayak is alot more forgiving than concrete.

Doing a slow and steady restoration on an ole 78' Bronco. It's going to be my beach runner/kayak hauler. I'm tired of my Jeep smelling like fish and salt everytime I come home from fishing.

The bed was just a smidge too short to have a good stable platform for the PA, and I really don't like the idea of a bed extender that has to come on and off. I don't have enough room for the stuff I already own.

So I whipped this bad boy up. Made from 1inch square stock. I couldn't find a foam pad long enough so I took a pool noodle and wrapped it in some nice abrasion resistance fabric I found at Joannes. The bar cost about $24 to make and the pad was $8. For $32 and some of my time, I'm pretty happy with the results.

[makobob]

That is a nice simple solution for an extender.

[Dirty Curti]

Found these videos on building a kayak cart.

http://palmettokayakfishing.blogspot...art-build.html

http://palmettokayakfishing.blogspot...ayak-cart.html

[FishNinjaY]

Originally Posted by Drake

Doing a slow and steady restoration on an ole 78' Bronco. It's going to be my beach runner/kayak hauler. I'm tired of my Jeep smelling like fish and salt everytime I come home from fishing.

The bed was just a smidge too short to have a good stable platform for the PA, and I really don't like the idea of a bed extender that has to come on and off. I don't have enough room for the stuff I already own.

So I whipped this bad boy up. Made from 1inch square stock. I couldn't find a foam pad long enough so I took a pool noodle and wrapped it in some nice abrasion resistance fabric I found at Joannes. The bar cost about $24 to make and the pad was $8. For $32 and some of my time, I'm pretty happy with the results.

Excellent idea!

Just wondering how long your kayak is? It looks like a PA, but not sure if it's the 12 or the 14? I have an Oasis tandem, which is 14.5ft.

Does the front of your kayak rest IN BETWEEN your seats? I guess I'm just wondering how much length of kayak is inside and resting on the truck bed+liftgate+extender, and how much is hanging off the back.

Thanks..

[alanw]

Don't take this wrong because I think that's a good idea, but from the pictures it looks like a weak design with those hinges. Plus is that short of an extension even worth it? I think maybe a bigger tube on the tailgate with an extension tube that slips inside the bigger one would be clean and strong.

[FishNinjaY]

I think it's probably good. I agree, that a tube sliding within a larger tube would be much stronger and eliminate the hinge. But, I think the way it is the kayak center-of-gravity (COG) is well in front of that hinge. I think this rear extender is not supporting much weight, and just mainly for balance and some more spreading or distribution of the weight. I like that it folds out of the way. Also, I could see it possible to add a short bar on each arm to span across the hinge to lock it in and further reinforce this weak point.

I popped the original pin out of the hinges and replaced them with high grade stainless steel bolts. The hinge holds my weight at 220lb. Also, that little bit of an extension really was all I needed. It also gave me an additional place to strap the kayak down. I strap it like I would to any other roof rack. I'm an engineer. I though of everthing


The sliding tube was my first thought, but coating it to prevent rust was an issue, since the paint of the smaller tube would continue to scrape off

[bus kid]

Originally Posted by Drake

my weight at 220lb.

You on a diet?

[Jimmyz123]

Yep, I built another Kayak Cart.





https://www.youtube.com/watch?v=qG2oGTiHLB8