NEED: Water Pump 1500 Silverado - Kayak Fishing Adventures on Big Water’s Edge

Tman · 09-30-2011, 07:03 PM

Kayak related, only way to get the yaks to the pond...

Any of you guys or gals have any connections?

Truck overheated twice, once am taking Clay to school, changed the thermostat, went to pick him up, overheated again (yes I know I am phooked).

Took off water pump, wondering if any of you can get one cheap or maybe trade some reels, rods, hell, even a freezer loaded with prime bug bait...even some

nets/bait cages...

PM me, appreciate any help. Cell 619-392-4186

At this point I'm ready to trade the phooker for a VW Bus or Vanagon...

467echo · 09-30-2011, 08:23 PM

Usualy labor is the costly part of it. You should be able to get a water pump for that for about $100 at almost any parts store. Good Luck

Tman · 09-30-2011, 09:38 PM

That is why I took the pump off myself, pretty easy actually.

Getting an extra Benjamin?

467echo · 09-30-2011, 09:47 PM

If you have some nets to sell, now would be a quick easy time to sell, hell I might get some off of you.

Billy V · 09-30-2011, 10:17 PM

A few things to be aware of when replacing a water pump.

Use an RTV Sealant that is specifically design for Water Pump/Thermostat housing - with Glycol resistance.
This one -> http://www.permatex.com/products/Aut...one_Gasket.htm

Also
A couple of the lower bolts on the pump will pass through the coolant. Those bolts need to be prepped with sealant as well.

Lastly
Prep and clean your mating surfaces carefully to remove all the old gasket material. When you apply the New gasket sealant use a moderate amount - enough to get the job done - not an overloaded amount.
-The reason for this is excess sealant will find its way into your radiator and clog cooling passages.

Its a straight forward job from there.

coxtanker421 · 10-01-2011, 05:12 PM

stupid ? do they have pick a part in s.d. im in s.f. valley. i could be wrong but those pumps should be a dime a dozen? pm if u want a LA price? heading that way soon.

mtnbykr2 · 10-01-2011, 10:30 PM

thanks for the tips nice talkin to ya, talk to you soon...late....b

Tman · 10-02-2011, 10:24 AM

Quote:

Originally Posted by coxtanker421

stupid ? do they have pick a part in s.d. im in s.f. valley. i could be wrong but those pumps should be a dime a dozen? pm if u want a LA price? heading that way soon.

Ouch...I got feelings too ya know...

Definitely not much sense putting a used one on, that would be, well, stupid.

mtnbykr2, thanks for the tips.

Appreciate all of your input, esp with the experience you have.
This is what makes BWE good...

Billy V, putting the pump on manana, you coming over?

09-30-2011, 07:03 PM	#1
Tman BRTF...bought & paid... Join Date: Mar 2005 Posts: 1,247	NEED: Water Pump 1500 Silverado Kayak related, only way to get the yaks to the pond... Any of you guys or gals have any connections? Truck overheated twice, once am taking Clay to school, changed the thermostat, went to pick him up, overheated again (yes I know I am phooked). Took off water pump, wondering if any of you can get one cheap or maybe trade some reels, rods, hell, even a freezer loaded with prime bug bait...even some nets/bait cages... PM me, appreciate any help. Cell 619-392-4186 At this point I'm ready to trade the phooker for a VW Bus or Vanagon... __________________ Adios Tman Gaffer for Clay the Fishcatcher

09-30-2011, 08:23 PM	#2
467echo Rookie of the Month Club Join Date: Nov 2008 Location: Mira Mesa Posts: 483	Usualy labor is the costly part of it. You should be able to get a water pump for that for about $100 at almost any parts store. Good Luck __________________ they are getting bigger....

09-30-2011, 09:38 PM	#3
Tman BRTF...bought & paid... Join Date: Mar 2005 Posts: 1,247	That is why I took the pump off myself, pretty easy actually. Getting an extra Benjamin? __________________ Adios Tman Gaffer for Clay the Fishcatcher

09-30-2011, 09:47 PM	#4
467echo Rookie of the Month Club Join Date: Nov 2008 Location: Mira Mesa Posts: 483	If you have some nets to sell, now would be a quick easy time to sell, hell I might get some off of you. __________________ they are getting bigger....

09-30-2011, 10:17 PM	#5
Billy V Senior Member Join Date: Sep 2006 Location: Bay Ho Posts: 1,382	A few things to be aware of when replacing a water pump. Use an RTV Sealant that is specifically design for Water Pump/Thermostat housing - with Glycol resistance. This one -> http://www.permatex.com/products/Aut...one_Gasket.htm Also A couple of the lower bolts on the pump will pass through the coolant. Those bolts need to be prepped with sealant as well. Lastly Prep and clean your mating surfaces carefully to remove all the old gasket material. When you apply the New gasket sealant use a moderate amount - enough to get the job done - not an overloaded amount. -The reason for this is excess sealant will find its way into your radiator and clog cooling passages. Its a straight forward job from there. __________________

10-01-2011, 05:12 PM	#6
coxtanker421 Senior Member Join Date: Feb 2011 Posts: 270	stupid ? do they have pick a part in s.d. im in s.f. valley. i could be wrong but those pumps should be a dime a dozen? pm if u want a LA price? heading that way soon.

10-01-2011, 10:30 PM	#7
mtnbykr2 Senior Member Join Date: Sep 2009 Location: newbury park ca Posts: 2,323	thanks for the tips nice talkin to ya, talk to you soon...late....b

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode